 |
|
|
|
Next: bleachbot cmsg messages
|
| Author |
Message |
External
Since: Apr 13, 2009
Posts: 1
|
(Msg. 1) Posted: Mon Apr 13, 2009 1:01 pm
Post subject: 10g clusterware causes reboots
Archived from groups: comp>databases>oracle>server (more info?)
|
|
|
I have Linux (OEL5.2) running 10g clusterware on 2 nodes.
OCFS2 is running as well, with a SAN-based OCFS2 filesystem
mounted on both hosts (written to by only one until the other fails
over).
When I reboot one host, the ethernet interface eth0:2 appears on the
other, assuming the VIP of the downed host.
But then when that host comes back up, the 2nd host reboots
itself outright. Has anyone seen this behavior in either
clusterware or OCFS2 before? Oracle engineers claim it's
OCFS2 doing this but I'm not sure. Why would wither host
reboot at all without me doing the rebooting?
Some lines from dmesg on the first host:
Apr 8 12:04:35 node1 kernel: 0000:00:04.0: eth3: Link is Down
Apr 8 12:04:38 node1 kernel: o2net: no longer connected to node node2
(num 1) at 10.156.90.62:7777
Apr 8 12:04:41 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
Full Duplex, Flow Control: RX/TX
Apr 8 12:05:08 node1 kernel: (3485,0):o2net_connect_expired:1637
ERROR: no connection established with node 1 after 30.0 seconds,
giving up and returning errors.
Apr 8 12:05:13 node1 kernel: (3606,0):dlm_send_proxy_ast_msg:457
ERROR: status = -107
Apr 8 12:05:13 node1 kernel: (3606,0):dlm_flush_asts:584 ERROR:
status = -107
Apr 8 12:05:13 node1 kernel: (3606,0):dlm_send_proxy_ast_msg:457
ERROR: status = -107
Apr 8 12:05:13 node1 kernel: (3606,0):dlm_flush_asts:584 ERROR:
status = -107
Apr 8 12:05:13 node1 kernel: (3606,0):dlm_send_proxy_ast_msg:457
ERROR: status = -107
Apr 8 12:05:13 node1 kernel: (3606,0):dlm_flush_asts:584 ERROR:
status = -107
Apr 8 12:05:38 node1 kernel: (3485,0):o2net_connect_expired:1637
ERROR: no connection established with node 1 after 30.0 seconds,
giving up and returning errors.
Apr 8 12:05:47 node1 kernel: 0000:00:04.0: eth3: Link is Down
Apr 8 12:05:49 node1 kernel: 0000:00:04.0: eth3: Link is Up 10 Mbps
Full Duplex, Flow Control: RX/TX
Apr 8 12:05:49 node1 kernel: 0000:00:04.0: eth3: 10/100 speed:
disabling TSO
Apr 8 12:06:06 node1 kernel: 0000:00:04.0: eth3: Link is Down
Apr 8 12:06:08 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
Full Duplex, Flow Control: RX/TX
Apr 8 12:06:08 node1 kernel: (3485,0):o2net_connect_expired:1637
ERROR: no connection established with node 1 after 30.0 seconds,
giving up and returning errors.
Apr 8 12:06:38 node1 kernel: (3485,0):o2net_connect_expired:1637
ERROR: no connection established with node 1 after 30.0 seconds,
giving up and returning errors.
Apr 8 12:06:48 node1 kernel: (3591,1):ocfs2_dlm_eviction_cb:98 device
(120,1): dlm has evicted node 1
Apr 8 12:06:48 node1 kernel: (14161,1):dlm_get_lock_resource:839
3930352DB2134782B730C44078E58F29:M000000000000000000001957f095b1: at
least one node (1) to recover before lock mastery can begin
Apr 8 12:06:49 node1 kernel: (14161,1):dlm_get_lock_resource:893
3930352DB2134782B730C44078E58F29:M000000000000000000001957f095b1: at
least one node (1) to recover before lock mastery can begin
Apr 8 12:06:50 node1 kernel: (3607,1):dlm_get_lock_resource:839
3930352DB2134782B730C44078E58F29:$RECOVERY: at least one node (1) to
recover before lock mastery can begin
Apr 8 12:06:50 node1 kernel: (3607,1):dlm_get_lock_resource:873
3930352DB2134782B730C44078E58F29: recovery map is not empty, but must
master $RECOVERY lock now
Apr 8 12:06:50 node1 kernel: (3607,1):dlm_do_recovery:524 (3607) Node
0 is the Recovery Master for the Dead Node 1 for Domain
3930352DB2134782B730C44078E58F29
Apr 8 12:07:00 node1 kernel: (14161,1):ocfs2_replay_journal:1076
Recovering node 1 from slot 1 on device (120,1)
Apr 8 12:07:02 node1 kernel: kjournald starting. Commit interval 5
seconds
Apr 8 12:07:35 node1 sshd[14480]: Accepted password for fbaker from
10.156.20.20 port 48972 ssh2
Apr 8 12:08:25 node1 kernel: 0000:00:04.0: eth3: Link is Down
Apr 8 12:08:27 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
Full Duplex, Flow Control: RX/TX
Apr 8 12:08:44 node1 kernel: 0000:00:04.0: eth3: Link is Down
Apr 8 12:08:46 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
Full Duplex, Flow Control: RX/TX
Apr 8 12:08:57 node1 kernel: o2net: accepted connection from node
node2 (num 1) at 10.156.90.62:7777
Apr 8 12:09:01 node1 kernel: ocfs2_dlm: Node 1 joins domain
3930352DB2134782B730C44078E58F29
Apr 8 12:09:01 node1 kernel: ocfs2_dlm: Nodes in domain
("3930352DB2134782B730C44078E58F29"): 0 1
Apr 8 13:47:46 node1 sshd[17710]: Accepted password for btsvetko from
10.156.20.20 port 50015 ssh2
Apr 8 13:55:50 node1 sshd[20717]: Failed password for dmaki from
10.156.20.20 port 50108 ssh2
Apr 8 13:55:58 node1 sshd[20717]: Accepted password for dmaki from
10.156.20.20 port 50108 ssh2
Apr 8 13:55:58 node1 sshd[20808]: subsystem request for sftp
Apr 8 13:57:20 node1 sshd[21307]: Accepted password for dmaki from
10.156.20.20 port 50124 ssh2
Apr 8 14:20:11 node1 kernel: bnx2: eth0: using MSI
Apr 8 14:20:11 node1 kernel: ADDRCONF(NETDEV_UP): eth0: link is not
ready
Apr 8 14:20:14 node1 kernel: bnx2: eth0 NIC Copper Link is Up, 1000
Mbps full duplex, receive & transmit flow control ON
Apr 8 14:20:14 node1 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link
becomes ready
Apr 8 14:20:15 node1 kernel: ADDRCONF(NETDEV_UP): eth3: link is not
ready
Apr 8 14:20:16 node1 kernel: o2net: no longer connected to node node2
(num 1) at 10.156.90.62:7777
Apr 8 14:20:17 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
Full Duplex, Flow Control: RX/TX
Apr 8 14:20:17 node1 kernel: ADDRCONF(NETDEV_CHANGE): eth3: link
becomes ready
Apr 8 14:20:46 node1 kernel: (3485,0):o2net_connect_expired:1637
ERROR: no connection established with node 1 after 30.0 seconds,
giving up and returning errors.
Apr 8 14:21:14 node1 kernel: (3606,2):dlm_send_proxy_ast_msg:457
ERROR: status = -107
Apr 8 14:21:14 node1 kernel: (3606,2):dlm_flush_asts:584 ERROR:
status = -107
Apr 8 14:21:14 node1 kernel: (3606,2):dlm_send_proxy_ast_msg:457
ERROR: status = -107
Apr 8 14:21:14 node1 kernel: (3606,2):dlm_flush_asts:584 ERROR:
status = -107
Apr 8 14:21:14 node1 kernel: (3606,2):dlm_send_proxy_ast_msg:457
ERROR: status = -107
Apr 8 14:21:14 node1 kernel: (3606,2):dlm_flush_asts:584 ERROR:
status = -107
Apr 8 14:21:16 node1 kernel: (3485,0):o2net_connect_expired:1637
ERROR: no connection established with node 1 after 30.0 seconds,
giving up and returning errors.
Apr 8 14:21:20 node1 kernel: 0000:00:04.0: eth3: Link is Down
Apr 8 14:21:22 node1 kernel: 0000:00:04.0: eth3: Link is Up 10 Mbps
Full Duplex, Flow Control: RX/TX
Apr 8 14:21:22 node1 kernel: 0000:00:04.0: eth3: 10/100 speed:
disabling TSO
Apr 8 14:21:40 node1 kernel: 0000:00:04.0: eth3: Link is Down
Apr 8 14:21:42 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
Full Duplex, Flow Control: RX/TX
Apr 8 14:21:46 node1 kernel: (3485,0):o2net_connect_expired:1637
ERROR: no connection established with node 1 after 30.0 seconds,
giving up and returning errors.
Apr 8 14:22:16 node1 kernel: (3485,0):o2net_connect_expired:1637
ERROR: no connection established with node 1 after 30.0 seconds,
giving up and returning errors.
Apr 8 14:22:22 node1 kernel: (3591,1):ocfs2_dlm_eviction_cb:98 device
(120,1): dlm has evicted node 1
Apr 8 14:22:22 node1 kernel: (30933,1):ocfs2_replay_journal:1076
Recovering node 1 from slot 1 on device (120,1)
Apr 8 14:22:23 node1 kernel: kjournald starting. Commit interval 5
seconds
Apr 8 14:22:23 node1 kernel: (3603,1):dlm_get_lock_resource:839
3930352DB2134782B730C44078E58F29:M000000000000000000000d57f095b1: at
least one node (1) to recover before lock mastery can begin
Apr 8 14:22:24 node1 kernel: (3603,1):dlm_get_lock_resource:893
3930352DB2134782B730C44078E58F29:M000000000000000000000d57f095b1: at
least one node (1) to recover before lock mastery can begin
Apr 8 14:22:25 node1 kernel: (3607,1):dlm_get_lock_resource:839
3930352DB2134782B730C44078E58F29:$RECOVERY: at least one node (1) to
recover before lock mastery can begin
Apr 8 14:22:25 node1 kernel: (3607,1):dlm_get_lock_resource:873
3930352DB2134782B730C44078E58F29: recovery map is not empty, but must
master $RECOVERY lock now
Apr 8 14:22:25 node1 kernel: (3607,1):dlm_do_recovery:524 (3607) Node
0 is the Recovery Master for the Dead Node 1 for Domain
3930352DB2134782B730C44078E58F29
Apr 8 14:23:59 node1 kernel: 0000:00:04.0: eth3: Link is Down
Apr 8 14:24:01 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
Full Duplex, Flow Control: RX/TX
Apr 8 14:24:17 node1 kernel: 0000:00:04.0: eth3: Link is Down
Apr 8 14:24:19 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
Full Duplex, Flow Control: RX/TX
Apr 8 14:24:30 node1 kernel: o2net: accepted connection from node
node2 (num 1) at 10.156.90.62:7777
Apr 8 14:24:34 node1 kernel: ocfs2_dlm: Node 1 joins domain
3930352DB2134782B730C44078E58F29
Apr 8 14:24:34 node1 kernel: ocfs2_dlm: Nodes in domain
("3930352DB2134782B730C44078E58F29"): 0 1
Apr 8 14:26:01 node1 sshd[32356]: Accepted password for fbaker from
10.156.20.20 port 50752 ssh2
Apr 8 15:21:27 node1 sshd[19725]: Accepted password for fbaker from
10.156.20.20 port 51383 ssh2
Apr 8 15:24:52 node1 kernel: ocfs2_hb_ctl[21047]: segfault at
0000000000000000 rip 0000000000428fa0 rsp 00007fff77c60688 error 4
Apr 8 15:24:52 node1 kernel: ocfs2: Unmounting device (120,1) on
(node 0)
Apr 8 15:24:53 node1 xinetd[3676]: Exiting...
Apr 8 15:24:56 node1 ntpd[3694]: ntpd exiting on signal 15
Apr 8 15:24:56 node1 rpc.statd[3421]: Caught signal 15, un-
registering and exiting.
Apr 8 15:24:56 node1 portmap[21164]: connect from 127.0.0.1 to unset
(status): request from unprivileged port
Apr 8 15:24:57 node1 auditd[3036]: The audit daemon is exiting.
Apr 8 15:24:57 node1 kernel: printk: 233 messages suppressed.
Apr 8 15:24:57 node1 kernel: audit(1239218697.229:9819): audit_pid=0
old=3036 by auid=4294967295
Apr 8 15:24:57 node1 kernel: Kernel logging (proc) stopped.
Apr 8 15:24:57 node1 kernel: Kernel log daemon terminating.
Apr 8 15:24:58 node1 exiting on signal 15
Apr 8 15:26:58 node1 syslogd 1.4.1: restart.
Apr 8 15:26:58 node1 kernel: klogd 1.4.1, log source = /proc/kmsg
started.
Apr 8 15:26:58 node1 kernel: Linux version 2.6.18-92.el5
(mockbuild@ca-build15.us.oracle.com) (gcc version 4.1.2 20071124 (Red
Hat 4.1.2-41)) #1 SMP Fri May 23 23:40:43 EDT 2008
Apr 8 15:26:58 node1 kernel: Command line: ro root=LABEL=/ rhgb quiet
Apr 8 15:26:58 node1 kernel: BIOS-provided physical RAM map:
Apr 8 15:26:58 node1 kernel: BIOS-e820: 0000000000000000 -
00000000000a0000 (usable)
Apr 8 15:26:58 node1 kernel: BIOS-e820: 0000000000100000 -
00000000cfb50000 (usable)
Apr 8 15:26:58 node1 kernel: BIOS-e820: 00000000cfb50000 -
00000000cfb66000 (reserved)
Apr 8 15:26:58 node1 kernel: BIOS-e820: 00000000cfb66000 -
00000000cfb85c00 (ACPI data)
Apr 8 15:26:58 node1 kernel: BIOS-e820: 00000000cfb85c00 -
00000000d0000000 (reserved)
Apr 8 15:26:58 node1 kernel: BIOS-e820: 00000000e0000000 -
00000000f0000000 (reserved)
Apr 8 15:26:58 node1 kernel: BIOS-e820: 00000000fe000000 -
0000000100000000 (reserved)
Apr 8 15:26:58 node1 kernel: BIOS-e820: 0000000100000000 -
0000000130000000 (usable)
Apr 8 15:26:58 node1 kernel: DMI 2.5 present.
Apr 8 15:26:58 node1 rpc.statd[3348]: Version 1.0.9 Starting
Apr 8 15:26:58 node1 modprobe: FATAL: Module ocfs2_stackglue not
found.
Apr 8 15:26:59 node1 kernel: No NUMA configuration found
Apr 8 15:26:59 node1 kernel: Faking a node at
0000000000000000-0000000130000000
Apr 8 15:26:59 node1 kernel: Bootmem setup node 0
0000000000000000-0000000130000000
Apr 8 15:26:59 node1 kernel: Memory for crash kernel (0x0 to 0x0)
notwithin permissible range
Apr 8 15:26:59 node1 kernel: disabling kdump
Apr 8 15:26:59 node1 kernel: ACPI: PM-Timer IO Port: 0x808
Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id
[0x00] enabled)
Apr 8 15:26:59 node1 kernel: Processor #0 7:7 APIC version 20
Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id
[0x02] enabled)
Apr 8 15:26:59 node1 kernel: Processor #2 7:7 APIC version 20
Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id
[0x01] enabled)
Apr 8 15:26:59 node1 kernel: Processor #1 7:7 APIC version 20
Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id
[0x03] enabled)
Apr 8 15:26:59 node1 kernel: Processor #3 7:7 APIC version 20
Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id
[0x14] disabled)
Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id
[0x15] disabled)
Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id
[0x16] disabled)
Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id
[0x17] disabled)
Apr 8 15:26:59 node1 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge
lint[0x1])
Apr 8 15:26:59 node1 kernel: ACPI: IOAPIC (id[0x04] address
[0xfec00000] gsi_base[0])
Apr 8 15:26:59 node1 kernel: IOAPIC[0]: apic_id 4, version 32,
address 0xfec00000, GSI 0-23
Apr 8 15:26:59 node1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0
global_irq 2 dfl dfl)
Apr 8 15:26:59 node1 EV_AGENT[3437]: Line Not Parsed, Line#108
search /user root - Application and revision : @(#) libraid++ Revision
6.26.2.0.2 for Linux on 12/5/2007 8:12:01, Error Origination:
EV_ConfigInfoFileManager::_parseConfigfile()
Apr 8 15:26:59 node1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9
global_irq 9 high level)
Apr 8 15:26:59 node1 kernel: Setting APIC routing to physical flat
Apr 8 15:27:00 node1 kernel: ACPI: HPET id: 0x8086a201 base:
0xfed00000
Apr 8 15:27:00 node1 kernel: Using ACPI (MADT) for SMP configuration
information
Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000000a0000 -
0000000000100000
Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000cfb50000 -
00000000cfb66000
Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000cfb66000 -
00000000cfb85000
Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000cfb85000 -
00000000cfb86000
Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000cfb86000 -
00000000d0000000
Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000d0000000 -
00000000e0000000
Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000e0000000 -
00000000f0000000
Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000f0000000 -
00000000fe000000
Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000fe000000 -
0000000100000000
Apr 8 15:27:00 node1 kernel: Allocating PCI resources starting at
d1000000 (gap: d0000000:10000000)
Apr 8 15:27:00 node1 kernel: SMP: Allowing 8 CPUs, 4 hotplug CPUs
Apr 8 15:27:00 node1 kernel: Built 1 zonelists. Total pages: 1029006
Apr 8 15:27:00 node1 kernel: Kernel command line: ro root=LABEL=/
rhgb quiet
Apr 8 15:27:00 node1 kernel: Initializing CPU#0
Apr 8 15:27:00 node1 kernel: PID hash table entries: 4096 (order: 12,
32768 bytes)
Apr 8 15:27:00 node1 kernel: Console: colour VGA+ 80x25
Apr 8 15:27:00 node1 kernel: Dentry cache hash table entries: 524288
(order: 10, 4194304 bytes)
Apr 8 15:27:00 node1 kernel: Inode-cache hash table entries: 262144
(order: 9, 2097152 bytes)
Apr 8 15:27:00 node1 kernel: Checking aperture...
Apr 8 15:27:00 node1 kernel: PCI-DMA: Using software bounce buffering
for IO (SWIOTLB)
Apr 8 15:27:00 node1 kernel: Placing software IO TLB between
0x165d000 - 0x565d000
Apr 8 15:27:00 node1 kernel: Memory: 4040256k/4980736k available
(2457k kernel code, 148864k reserved, 1246k data, 196k init)
Apr 8 15:27:00 node1 kernel: Calibrating delay using timer specific
routine.. 5989.09 BogoMIPS (lpj=2994549)
Apr 8 15:27:00 node1 kernel: Security Framework v1.0.0 initialized
Apr 8 15:27:00 node1 kernel: SELinux: Initializing.
Apr 8 15:27:00 node1 kernel: selinux_register_security: Registering
secondary module capability
Apr 8 15:27:00 node1 kernel: Capability LSM initialized as secondary
Apr 8 15:27:01 node1 kernel: Mount-cache hash table entries: 256
Apr 8 15:27:01 node1 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Apr 8 15:27:01 node1 kernel: CPU: L2 cache: 6144K
Apr 8 15:27:01 node1 kernel: using mwait in idle threads.
Apr 8 15:27:01 node1 kernel: CPU: Physical Processor ID: 0
Apr 8 15:27:01 node1 kernel: CPU: Processor Core ID: 0
Apr 8 15:27:01 node1 kernel: CPU0: Thermal monitoring enabled (TM1)
Apr 8 15:27:01 node1 kernel: SMP alternatives: switching to UP code
Apr 8 15:27:01 node1 kernel: ACPI: Core revision 20060707
Apr 8 15:27:01 node1 kernel: Using local APIC timer interrupts.
Apr 8 15:27:01 node1 kernel: result 20781505
Apr 8 15:27:01 node1 kernel: Detected 20.781 MHz APIC timer.
Apr 8 15:27:01 node1 kernel: SMP alternatives: switching to SMP code
Apr 8 15:27:01 node1 Navisphere Agent[3437]: Agent initializing with
pid 3437
Apr 8 15:27:01 node1 kernel: Booting processor 1/4 APIC 0x2
Apr 8 15:27:01 node1 kernel: Initializing CPU#1
Apr 8 15:27:01 node1 kernel: Calibrating delay using timer specific
routine.. 5985.00 BogoMIPS (lpj=2992504)
Apr 8 15:27:01 node1 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Apr 8 15:27:01 node1 kernel: CPU: L2 cache: 6144K
Apr 8 15:27:01 node1 kernel: CPU: Physical Processor ID: 0
Apr 8 15:27:01 node1 kernel: CPU: Processor Core ID: 2
Apr 8 15:27:01 node1 kernel: CPU1: Thermal monitoring enabled (TM2)
Apr 8 15:27:01 node1 kernel: Intel(R) Xeon(R) CPU E5450 @
3.00GHz stepping 06
Apr 8 15:27:01 node1 kernel: CPU 1: Syncing TSC to CPU 0.
Apr 8 15:27:01 node1 kernel: CPU 1: synchronized TSC with CPU 0 (last
diff -2071 cycles, maxerr 594 cycles)
Apr 8 15:27:01 node1 kernel: SMP alternatives: switching to SMP code
Apr 8 15:27:01 node1 kernel: Booting processor 2/4 APIC 0x1
Apr 8 15:27:01 node1 kernel: Initializing CPU#2
Apr 8 15:27:02 node1 kernel: Calibrating delay using timer specific
routine.. 5984.25 BogoMIPS (lpj=2992127)
Apr 8 15:27:02 node1 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Apr 8 15:27:02 node1 kernel: CPU: L2 cache: 6144K
Apr 8 15:27:02 node1 kernel: CPU: Physical Processor ID: 0
Apr 8 15:27:02 node1 kernel: CPU: Processor Core ID: 1
Apr 8 15:27:02 node1 kernel: CPU2: Thermal monitoring enabled (TM2)
Apr 8 15:27:02 node1 kernel: Intel(R) Xeon(R) CPU E5450 @
3.00GHz stepping 06
Apr 8 15:27:02 node1 kernel: CPU 2: Syncing TSC to CPU 0.
Apr 8 15:27:02 node1 kernel: CPU 2: synchronized TSC with CPU 0 (last
diff -2056 cycles, maxerr 594 cycles)
Apr 8 15:27:02 node1 kernel: SMP alternatives: switching to SMP code
Apr 8 15:27:02 node1 kernel: Booting processor 3/4 APIC 0x3
Apr 8 15:27:02 node1 kernel: Initializing CPU#3
Apr 8 15:27:02 node1 kernel: Calibrating delay using timer specific
routine.. 5985.00 BogoMIPS (lpj=2992504)
Apr 8 15:27:02 node1 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Apr 8 15:27:02 node1 EV_AGENT[3493]: Agent daemon process created,
pid 3493
Apr 8 15:27:02 node1 kernel: CPU: L2 cache: 6144K
Apr 8 15:27:02 node1 EV_AGENT[3493]: Agent has started up.
Apr 8 15:27:02 node1 kernel: CPU: Physical Processor ID: 0
Apr 8 15:27:02 node1 kernel: CPU: Processor Core ID: 3
Apr 8 15:27:02 node1 kernel: CPU3: Thermal monitoring enabled (TM2)
Apr 8 15:27:02 node1 kernel: Intel(R) Xeon(R) CPU E5450 @
3.00GHz stepping 06
Apr 8 15:27:02 node1 kernel: CPU 3: Syncing TSC to CPU 0.
Apr 8 15:27:02 node1 kernel: CPU 3: synchronized TSC with CPU 0 (last
diff -2052 cycles, maxerr 594 cycles)
Apr 8 15:27:02 node1 kernel: Brought up 4 CPUs
Apr 8 15:27:02 node1 kernel: testing NMI watchdog ... OK.
Apr 8 15:27:02 node1 kernel: time.c: Using 14.318180 MHz WALL HPET
GTOD HPET timer.
Apr 8 15:27:02 node1 kernel: time.c: Detected 2992.536 MHz processor.
Apr 8 15:27:03 node1 kernel: migration_cost=18,3689
Apr 8 15:27:03 node1 kernel: checking if image is initramfs... it is
Apr 8 15:27:03 node1 kernel: Freeing initrd memory: 2970k freed
Apr 8 15:27:03 node1 kernel: NET: Registered protocol family 16
Apr 8 15:27:03 node1 kernel: No dock devices found.
Apr 8 15:27:03 node1 kernel: ACPI: bus type pci registered
Apr 8 15:27:03 node1 kernel: PCI: Using MMCONFIG at e0000000
Apr 8 15:27:03 node1 kernel: PCI: Buses that can't use MMCONFIG will
use type 1 PCI conf access.
Apr 8 15:27:03 node1 kernel: ACPI: Interpreter enabled
Apr 8 15:27:03 node1 kernel: ACPI: Using IOAPIC for interrupt routing
Apr 8 15:27:03 node1 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Apr 8 15:27:03 node1 kernel: PCI: Dell PowerEdge 1950 detected,
enabling pci=bfsort.
Apr 8 15:27:03 node1 kernel: PCI: Ignoring BAR0-3 of IDE controller
0000:00:1f.1
Apr 8 15:27:03 node1 kernel: PCI: Transparent bridge - 0000:00:1e.0
Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK00] (IRQs 3
4 5 *6 7 10 11 12)
Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK01] (IRQs 3
4 *5 6 7 10 11 12)
Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK02] (IRQs 3
4 5 6 7 10 11 12) *0, disabled.
Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK03] (IRQs 3
4 5 6 7 10 *11 12)
Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK04] (IRQs 3
4 5 6 7 *10 11 12)
Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK05] (IRQs 3
4 5 6 7 10 *11 12)
Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK06] (IRQs 3
4 5 6 7 10 11 12) *0, disabled.
Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK07] (IRQs 3
4 5 6 7 10 11 12) *0, disabled.
Apr 8 15:27:04 node1 kernel: Linux Plug and Play Support v0.97 (c)
Adam Belay
Apr 8 15:27:04 node1 kernel: pnp: PnP ACPI init
Apr 8 15:27:04 node1 kernel: pnp: PnP ACPI: found 12 devices
Apr 8 15:27:04 node1 kernel: usbcore: registered new driver usbfs
Apr 8 15:27:04 node1 kernel: usbcore: registered new driver hub
Apr 8 15:27:04 node1 kernel: PCI: Using ACPI for IRQ routing
Apr 8 15:27:04 node1 kernel: PCI: If a device doesn't work, try
"pci=routeirq". If it helps, post a report
Apr 8 15:27:04 node1 kernel: NetLabel: Initializing
Apr 8 15:27:04 node1 kernel: NetLabel: domain hash size = 128
Apr 8 15:27:04 node1 kernel: NetLabel: protocols = UNLABELED CIPSOv4
Apr 8 15:27:04 node1 kernel: NetLabel: unlabeled traffic allowed by
default
Apr 8 15:27:04 node1 kernel: hpet0: at MMIO 0xfed00000 (virtual
0xffffffffff5fe000), IRQs 2, 8, 0
Apr 8 15:27:04 node1 kernel: hpet0: 3 64-bit timers, 14318180 Hz
Apr 8 15:27:04 node1 kernel: PCI-GART: No AMD northbridge found.
Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0x800-0x87f
could not be reserved
Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0x880-0x8bf has
been reserved
Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0x8c0-0x8df has
been reserved
Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0x8e0-0x8e3 has
been reserved
Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0x900-0x900 has
been reserved
Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0xc00-0xc7f has
been reserved
Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0xca0-0xca7 has
been reserved
Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0xca9-0xcab has
been reserved
Apr 8 15:27:04 node1 kernel: pnp: 00:09: ioport range 0xca8-0xca8 has
been reserved
Apr 8 15:27:04 node1 kernel: pnp: 00:09: ioport range 0xcac-0xcac has
been reserved
Apr 8 15:27:05 node1 kernel: PCI: Bridge: 0000:06:00.0
Apr 8 15:27:05 node1 kernel: IO window: disabled.
Apr 8 15:27:05 node1 kernel: MEM window: f4000000-f7ffffff
Apr 8 15:27:05 node1 kernel: PREFETCH window: disabled.
Apr 8 15:27:05 node1 kernel: PCI: Bridge: 0000:05:00.0
Apr 8 15:27:05 node1 kernel: IO window: disabled.
Apr 8 15:27:05 node1 kernel: MEM window: f4000000-f7ffffff
Apr 8 15:27:05 node1 kernel: PREFETCH window: disabled.
Apr 8 15:27:05 node1 kernel: PCI: Bridge: 0000:05:01.0
Apr 8 15:27:05 node1 kernel: IO window: disabled.
Apr 8 15:27:05 node1 kernel: MEM window: disabled.
Apr 8 15:27:05 node1 kernel: PREFETCH window: disabled.
Apr 8 15:27:05 node1 kernel: PCI: Bridge: 0000:04:00.0
Apr 8 15:27:05 node1 kernel: IO window: disabled.
Apr 8 15:27:05 node1 kernel: MEM window: f4000000-f7ffffff
Apr 8 15:27:05 node1 kernel: PREFETCH window: disabled.
Apr 8 15:27:05 node1 kernel: PCI: Bridge: 0000:04:00.3
Apr 8 15:27:05 node1 kernel: IO window: disabled.
Apr 8 15:27:05 node1 kernel: MEM window: disabled.
Apr 8 15:27:05 node1 kernel: PREFETCH window: disabled.
Apr 8 15:27:05 node1 kernel: PCI: Bridge: 0000:00:02.0
Apr 8 15:27:05 node1 kernel: IO window: disabled.
Apr 8 15:27:05 node1 kernel: MEM window: f2000000-f7ffffff
Apr 8 15:27:05 node1 kernel: PREFETCH window: disabled.
Apr 8 15:27:05 node1 kernel: PCI: Bridge: 0000:00:03.0
Apr 8 15:27:05 node1 kernel: IO window: e000-efff
Apr 8 15:27:05 node1 kernel: MEM window: fc700000-fc8fffff
Apr 8 15:27:05 node1 kernel: PREFETCH window: disabled.
Apr 8 15:27:06 node1 kernel: PCI: Bridge: 0000:00:04.0
Apr 8 15:27:06 node1 kernel: IO window: d000-dfff
Apr 8 15:27:06 node1 kernel: MEM window: fc500000-fc6fffff
Apr 8 15:27:06 node1 kernel: PREFETCH window: disabled.
Apr 8 15:27:06 node1 kernel: PCI: Bridge: 0000:00:05.0
Apr 8 15:27:06 node1 kernel: IO window: disabled.
Apr 8 15:27:06 node1 kernel: MEM window: disabled.
Apr 8 15:27:06 node1 kernel: PREFETCH window: disabled.
Apr 8 15:27:06 node1 kernel: PCI: Bridge: 0000:00:06.0
Apr 8 15:27:06 node1 kernel: IO window: c000-cfff
Apr 8 15:27:06 node1 kernel: MEM window: fc300000-fc4fffff
Apr 8 15:27:06 node1 kernel: PREFETCH window: d1000000-d10fffff
Apr 8 15:27:06 node1 kernel: PCI: Bridge: 0000:00:07.0
Apr 8 15:27:06 node1 kernel: IO window: disabled.
Apr 8 15:27:06 node1 kernel: MEM window: disabled.
Apr 8 15:27:06 node1 kernel: PREFETCH window: disabled.
Apr 8 15:27:06 node1 kernel: PCI: Bridge: 0000:02:00.0
Apr 8 15:27:06 node1 kernel: IO window: disabled.
Apr 8 15:27:06 node1 kernel: MEM window: f8000000-fbffffff
Apr 8 15:27:06 node1 kernel: PREFETCH window: disabled.
Apr 8 15:27:06 node1 kernel: PCI: Bridge: 0000:00:1c.0
Apr 8 15:27:06 node1 kernel: IO window: disabled.
Apr 8 15:27:06 node1 kernel: MEM window: f8000000-fbffffff
Apr 8 15:27:06 node1 kernel: PREFETCH window: disabled.
Apr 8 15:27:06 node1 kernel: PCI: Bridge: 0000:00:1e.0
Apr 8 15:27:06 node1 kernel: IO window: b000-bfff
Apr 8 15:27:06 node1 kernel: MEM window: fc100000-fc2fffff
Apr 8 15:27:06 node1 kernel: PREFETCH window: d8000000-dfffffff
Apr 8 15:27:07 node1 kernel: GSI 16 sharing vector 0xA9 and IRQ 16
Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:00:02.0[A] ->
GSI 16 (level, low) -> IRQ 169
Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:04:00.0[A] ->
GSI 16 (level, low) -> IRQ 169
Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:05:00.0[A] ->
GSI 16 (level, low) -> IRQ 169
Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:05:01.0[A] ->
GSI 16 (level, low) -> IRQ 169
Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:00:03.0[A] ->
GSI 16 (level, low) -> IRQ 169
Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:00:04.0[A] ->
GSI 16 (level, low) -> IRQ 169
Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:00:06.0[A] ->
GSI 16 (level, low) -> IRQ 169
Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] ->
GSI 16 (level, low) -> IRQ 169
Apr 8 15:27:07 node1 kernel: NET: Registered protocol family 2
Apr 8 15:27:07 node1 kernel: IP route cache hash table entries:
131072 (order: 8, 1048576 bytes)
Apr 8 15:27:07 node1 kernel: TCP established hash table entries:
262144 (order: 10, 4194304 bytes)
Apr 8 15:27:07 node1 kernel: TCP bind hash table entries: 65536
(order: 8, 1048576 bytes)
Apr 8 15:27:07 node1 kernel: TCP: Hash tables configured (established
262144 bind 65536)
Apr 8 15:27:07 node1 kernel: TCP reno registered
Apr 8 15:27:07 node1 kernel: audit: initializing netlink socket
(disabled)
Apr 8 15:27:07 node1 kernel: audit(1239218779.491:1): initialized
Apr 8 15:27:07 node1 kernel: Total HugeTLB memory allocated, 0
Apr 8 15:27:07 node1 kernel: VFS: Disk quotas dquot_6.5.1
Apr 8 15:27:07 node1 kernel: Dquot-cache hash table entries: 512
(order 0, 4096 bytes)
Apr 8 15:27:08 node1 kernel: Initializing Cryptographic API
Apr 8 15:27:08 node1 kernel: ksign: Installing public key data
Apr 8 15:27:08 node1 kernel: Loading keyring
Apr 8 15:27:08 node1 kernel: - Added public key 660501D58C5397BD
Apr 8 15:27:08 node1 kernel: - User ID: Red Hat, Inc. (Kernel Module
GPG key)
Apr 8 15:27:08 node1 kernel: io scheduler noop registered
Apr 8 15:27:08 node1 kernel: io scheduler anticipatory registered
Apr 8 15:27:08 node1 kernel: io scheduler deadline registered
Apr 8 15:27:08 node1 kernel: io scheduler cfq registered (default)
Apr 8 15:27:08 node1 kernel: assign_interrupt_mode Found MSI
capability
Apr 8 15:27:08 node1 last message repeated 5 times
Apr 8 15:27:08 node1 automount[3552]: lookup_read_master: lookup
(nisplus): couldn't locate nis+ table auto.master
Apr 8 15:27:08 node1 kernel: assign_interrupt_mode Found MSI
capability
Apr 8 15:27:09 node1 last message repeated 2 times
Apr 8 15:27:09 node1 kernel: pci_hotplug: PCI Hot Plug PCI Core
version: 0.5
Apr 8 15:27:09 node1 kernel: ACPI: CPU0 (power states: C1[C1] C3[C3])
Apr 8 15:27:09 node1 kernel: ACPI: CPU1 (power states: C1[C1] C3[C3])
Apr 8 15:27:09 node1 kernel: ACPI: CPU2 (power states: C1[C1] C3[C3])
Apr 8 15:27:09 node1 kernel: ACPI: CPU3 (power states: C1[C1] C3[C3])
Apr 8 15:27:09 node1 kernel: ACPI Exception (acpi_processor-0681):
AE_NOT_FOUND, Processor Device is not present [20060707]
Apr 8 15:27:09 node1 kernel: ACPI: Getting cpuindex for acpiid 0x5
Apr 8 15:27:09 node1 kernel: ACPI Exception (acpi_processor-0681):
AE_NOT_FOUND, Processor Device is not present [20060707]
Apr 8 15:27:09 node1 kernel: ACPI: Getting cpuindex for acpiid 0x6
Apr 8 15:27:09 node1 kernel: ACPI Exception (acpi_processor-0681):
AE_NOT_FOUND, Processor Device is not present [20060707]
Apr 8 15:27:09 node1 kernel: ACPI: Getting cpuindex for acpiid 0x7
Apr 8 15:27:09 node1 kernel: ACPI Exception (acpi_processor-0681):
AE_NOT_FOUND, Processor Device is not present [20060707]
Apr 8 15:27:09 node1 kernel: ACPI: Getting cpuindex for acpiid 0x8
Apr 8 15:27:09 node1 kernel: Real Time Clock Driver v1.12ac
Apr 8 15:27:09 node1 kernel: Non-volatile memory driver v1.2
Apr 8 15:27:09 node1 kernel: Linux agpgart interface v0.101 (c) Dave
Jones
Apr 8 15:27:09 node1 kernel: Serial: 8250/16550 driver $Revision:
1.90 $ 4 ports, IRQ sharing enabled
Apr 8 15:27:09 node1 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4)
is a 16550A
Apr 8 15:27:09 node1 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3)
is a 16550A
Apr 8 15:27:09 node1 kernel: 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a
16550A
Apr 8 15:27:09 node1 kernel: 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a
16550A
Apr 8 15:27:09 node1 kernel: RAMDISK driver initialized: 16 RAM disks
of 16384K size 4096 blocksize
Apr 8 15:27:09 node1 kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
Apr 8 15:27:09 node1 kernel: ide: Assuming 33MHz system bus speed for
PIO modes; override with idebus=xx
Apr 8 15:27:09 node1 kernel: ESB2: IDE controller at PCI slot
0000:00:1f.1
Apr 8 15:27:10 node1 kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] ->
GSI 16 (level, low) -> IRQ 169
Apr 8 15:27:10 node1 kernel: ESB2: chipset revision 9
Apr 8 15:27:10 node1 kernel: ESB2: not 100% native mode: will probe
irqs later
Apr 8 15:27:10 node1 kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS
settings: hda:DMA, hdb:pio
Apr 8 15:27:10 node1 kernel: hda: TEAC DVD-ROM DV28EV, ATAPI CD/DVD-
ROM drive
Apr 8 15:27:10 node1 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 8 15:27:10 node1 kernel: ide-floppy driver 0.99.newide
Apr 8 15:27:10 node1 kernel: usbcore: registered new driver hiddev
Apr 8 15:27:10 node1 kernel: usbcore: registered new driver usbhid
Apr 8 15:27:10 node1 kernel: drivers/usb/input/hid-core.c: v2.6:USB
HID core driver
Apr 8 15:27:10 node1 kernel: PNP: No PS/2 controller found. Probing
ports directly.
Apr 8 15:27:10 node1 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Apr 8 15:27:10 node1 kernel: serio: i8042 AUX port at 0x60,0x64 irq
12
Apr 8 15:27:10 node1 kernel: mice: PS/2 mouse device common for all
mice
Apr 8 15:27:10 node1 kernel: md: md driver 0.90.3 MAX_MD_DEVS=256,
MD_SB_DISKS=27
Apr 8 15:27:10 node1 kernel: md: bitmap version 4.39
Apr 8 15:27:10 node1 kernel: TCP bic registered
Apr 8 15:27:10 node1 kernel: Initializing IPsec netlink socket
Apr 8 15:27:10 node1 kernel: NET: Registered protocol family 1
Apr 8 15:27:10 node1 kernel: NET: Registered protocol family 17
Apr 8 15:27:10 node1 kernel: ACPI: (supports S0 S4 S5)
Apr 8 15:27:10 node1 kernel: Freeing unused kernel memory: 196k freed
Apr 8 15:27:10 node1 kernel: Write protecting the kernel read-only
data: 475k
Apr 8 15:27:10 node1 kernel: SCSI subsystem initialized
Apr 8 15:27:10 node1 kernel: QLogic Fibre Channel HBA Driver:
8.02.14.01
Apr 8 15:27:10 node1 kernel: ACPI: PCI Interrupt 0000:0c:00.0[A] ->
GSI 16 (level, low) -> IRQ 169
Apr 8 15:27:10 node1 kernel: qla2xxx 0000:0c:00.0: Found an ISP2432,
irq 169, iobase 0xffffc20000002000
Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: Configuring PCI
space...
Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: Configure NVRAM
parameters...
Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: Verifying loaded
RISC code...
Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: Allocated (64 KB)
for EFT...
Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: Allocated (1413
KB) for firmware dump...
Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: Waiting for LIP to
complete...
Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: LIP reset occured
(f700).
Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: LIP occured
(f700).
Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: LIP reset occured
(f7f7).
Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: LOOP UP detected
(4 Gbps).
Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: Topology -
(F_Port), Host Loop address 0x0
Apr 8 15:27:11 node1 kernel: scsi0 : qla2xxx
Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0:
Apr 8 15:27:11 node1 kernel: QLogic Fibre Channel HBA Driver:
8.02.14.01
Apr 8 15:27:11 node1 kernel: QLogic QLE2462 - PCI-Express to 4Gb
FC, Dual Channel
Apr 8 15:27:11 node1 kernel: ISP2432: PCIe (2.5GT/s x4) @ 0000:0c:
00.0 hdma+, host#=0, fw=4.04.00 [IP] [84XX]
Apr 8 15:27:11 node1 kernel: Vendor: DGC Model: RAID
5 Rev: 0326
Apr 8 15:27:11 node1 kernel: Type: Direct-
Access ANSI SCSI revision: 04
Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: scsi(0:0:0:0):
Enabled tagged queuing, queue depth 32.
Apr 8 15:27:11 node1 kernel: SCSI device sda: 560557312 512-byte hdwr
sectors (287005 MB)
Apr 8 15:27:11 node1 kernel: sda: test WP failed, assume Write
Enabled
Apr 8 15:27:11 node1 kernel: sda: asking for cache data failed
Apr 8 15:27:11 node1 kernel: sda: assuming drive cache: write through
Apr 8 15:27:11 node1 kernel: SCSI device sda: 560557312 512-byte hdwr
sectors (287005 MB)
Apr 8 15:27:11 node1 kernel: sda: test WP failed, assume Write
Enabled
Apr 8 15:27:11 node1 kernel: sda: asking for cache data failed
Apr 8 15:27:11 node1 kernel: sda: assuming drive cache: write through
Apr 8 15:27:11 node1 kernel: sda:<6>sd 0:0:0:0: Device not ready:
<6>: Current: sense key: Not Ready
Apr 8 15:27:12 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:12 node1 kernel:
Apr 8 15:27:12 node1 kernel: end_request: I/O error, dev sda, sector
0
Apr 8 15:27:12 node1 kernel: Buffer I/O error on device sda, logical
block 0
Apr 8 15:27:12 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:12 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:12 node1 kernel:
Apr 8 15:27:12 node1 kernel: end_request: I/O error, dev sda, sector
0
Apr 8 15:27:12 node1 kernel: Buffer I/O error on device sda, logical
block 0
Apr 8 15:27:12 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:12 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:12 node1 kernel:
Apr 8 15:27:12 node1 kernel: end_request: I/O error, dev sda, sector
0
Apr 8 15:27:12 node1 kernel: Buffer I/O error on device sda, logical
block 0
Apr 8 15:27:12 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:12 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:12 node1 kernel:
Apr 8 15:27:12 node1 kernel: end_request: I/O error, dev sda, sector
0
Apr 8 15:27:12 node1 kernel: Buffer I/O error on device sda, logical
block 0
Apr 8 15:27:12 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:12 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:12 node1 kernel:
Apr 8 15:27:12 node1 kernel: end_request: I/O error, dev sda, sector
0
Apr 8 15:27:12 node1 kernel: Buffer I/O error on device sda, logical
block 0
Apr 8 15:27:12 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:12 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:12 node1 kernel:
Apr 8 15:27:12 node1 kernel: end_request: I/O error, dev sda, sector
0
Apr 8 15:27:13 node1 kernel: Buffer I/O error on device sda, logical
block 0
Apr 8 15:27:13 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:13 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:13 node1 kernel:
Apr 8 15:27:13 node1 kernel: end_request: I/O error, dev sda, sector
0
Apr 8 15:27:13 node1 kernel: Buffer I/O error on device sda, logical
block 0
Apr 8 15:27:13 node1 kernel: Dev sda: unable to read RDB block 0
Apr 8 15:27:13 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:13 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:13 node1 kernel:
Apr 8 15:27:13 node1 kernel: end_request: I/O error, dev sda, sector
0
Apr 8 15:27:13 node1 kernel: Buffer I/O error on device sda, logical
block 0
Apr 8 15:27:13 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:13 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:13 node1 kernel:
Apr 8 15:27:13 node1 kernel: end_request: I/O error, dev sda, sector
0
Apr 8 15:27:13 node1 kernel: Buffer I/O error on device sda, logical
block 0
Apr 8 15:27:13 node1 kernel: unable to read partition table
Apr 8 15:27:13 node1 kernel: sd 0:0:0:0: Attached scsi disk sda
Apr 8 15:27:13 node1 kernel: Vendor: DGC Model: RAID
5 Rev: 0326
Apr 8 15:27:13 node1 kernel: Type: Direct-
Access ANSI SCSI revision: 04
Apr 8 15:27:13 node1 kernel: qla2xxx 0000:0c:00.0: scsi(0:0:1:0):
Enabled tagged queuing, queue depth 32.
Apr 8 15:27:13 node1 kernel: SCSI device sdb: 560557312 512-byte hdwr
sectors (287005 MB)
Apr 8 15:27:13 node1 kernel: sdb: Write Protect is off
Apr 8 15:27:13 node1 kernel: SCSI device sdb: drive cache: write
through
Apr 8 15:27:13 node1 kernel: SCSI device sdb: 560557312 512-byte hdwr
sectors (287005 MB)
Apr 8 15:27:13 node1 kernel: sdb: Write Protect is off
Apr 8 15:27:14 node1 kernel: SCSI device sdb: drive cache: write
through
Apr 8 15:27:14 node1 kernel: sdb: sdb1
Apr 8 15:27:14 node1 kernel: sd 0:0:1:0: Attached scsi disk sdb
Apr 8 15:27:14 node1 kernel: GSI 17 sharing vector 0x42 and IRQ 17
Apr 8 15:27:14 node1 kernel: ACPI: PCI Interrupt 0000:0c:00.1[B] ->
GSI 17 (level, low) -> IRQ 66
Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Found an ISP2432,
irq 66, iobase 0xffffc20000004000
Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Configuring PCI
space...
Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Configure NVRAM
parameters...
Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Verifying loaded
RISC code...
Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Allocated (64 KB)
for EFT...
Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Allocated (1413
KB) for firmware dump...
Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Waiting for LIP to
complete...
Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: LIP reset occured
(f700).
Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: LIP occured
(f700).
Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: LIP reset occured
(f7f7).
Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: LOOP UP detected
(4 Gbps).
Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Topology -
(F_Port), Host Loop address 0x0
Apr 8 15:27:14 node1 kernel: scsi1 : qla2xxx
Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1:
Apr 8 15:27:14 node1 kernel: QLogic Fibre Channel HBA Driver:
8.02.14.01
Apr 8 15:27:14 node1 kernel: QLogic QLE2462 - PCI-Express to 4Gb
FC, Dual Channel
Apr 8 15:27:14 node1 kernel: ISP2432: PCIe (2.5GT/s x4) @ 0000:0c:
00.1 hdma+, host#=1, fw=4.04.00 [IP] [84XX]
Apr 8 15:27:14 node1 kernel: Vendor: DGC Model: RAID
5 Rev: 0326
Apr 8 15:27:14 node1 kernel: Type: Direct-
Access ANSI SCSI revision: 04
Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: scsi(1:0:0:0):
Enabled tagged queuing, queue depth 32.
Apr 8 15:27:14 node1 kernel: SCSI device sdc: 560557312 512-byte hdwr
sectors (287005 MB)
Apr 8 15:27:14 node1 kernel: sdc: test WP failed, assume Write
Enabled
Apr 8 15:27:15 node1 kernel: sdc: asking for cache data failed
Apr 8 15:27:15 node1 kernel: sdc: assuming drive cache: write through
Apr 8 15:27:15 node1 kernel: SCSI device sdc: 560557312 512-byte hdwr
sectors (287005 MB)
Apr 8 15:27:15 node1 kernel: sdc: test WP failed, assume Write
Enabled
Apr 8 15:27:15 node1 kernel: sdc: asking for cache data failed
Apr 8 15:27:15 node1 kernel: sdc: assuming drive cache: write through
Apr 8 15:27:15 node1 kernel: sdc:<6>sd 1:0:0:0: Device not ready:
<6>: Current: sense key: Not Ready
Apr 8 15:27:15 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:15 node1 kernel:
Apr 8 15:27:15 node1 kernel: end_request: I/O error, dev sdc, sector
0
Apr 8 15:27:15 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:15 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:15 node1 kernel:
Apr 8 15:27:15 node1 kernel: end_request: I/O error, dev sdc, sector
0
Apr 8 15:27:15 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:15 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:15 node1 kernel:
Apr 8 15:27:15 node1 kernel: end_request: I/O error, dev sdc, sector
0
Apr 8 15:27:15 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:15 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:15 node1 kernel:
Apr 8 15:27:15 node1 kernel: end_request: I/O error, dev sdc, sector
0
Apr 8 15:27:15 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:15 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:15 node1 kernel:
Apr 8 15:27:15 node1 kernel: end_request: I/O error, dev sdc, sector
0
Apr 8 15:27:15 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:15 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:16 node1 kernel:
Apr 8 15:27:16 node1 kernel: end_request: I/O error, dev sdc, sector
0
Apr 8 15:27:16 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:16 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:16 node1 kernel:
Apr 8 15:27:16 node1 kernel: end_request: I/O error, dev sdc, sector
0
Apr 8 15:27:16 node1 kernel: Dev sdc: unable to read RDB block 0
Apr 8 15:27:16 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:16 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:16 node1 kernel:
Apr 8 15:27:16 node1 kernel: end_request: I/O error, dev sdc, sector
0
Apr 8 15:27:16 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:16 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:16 node1 kernel:
Apr 8 15:27:16 node1 kernel: end_request: I/O error, dev sdc, sector
0
Apr 8 15:27:16 node1 kernel: unable to read partition table
Apr 8 15:27:16 node1 kernel: sd 1:0:0:0: Attached scsi disk sdc
Apr 8 15:27:16 node1 kernel: Vendor: DGC Model: RAID
5 Rev: 0326
Apr 8 15:27:16 node1 kernel: Type: Direct-
Access ANSI SCSI revision: 04
Apr 8 15:27:16 node1 kernel: qla2xxx 0000:0c:00.1: scsi(1:0:1:0):
Enabled tagged queuing, queue depth 32.
Apr 8 15:27:16 node1 kernel: SCSI device sdd: 560557312 512-byte hdwr
sectors (287005 MB)
Apr 8 15:27:16 node1 kernel: sdd: Write Protect is off
Apr 8 15:27:16 node1 kernel: SCSI device sdd: drive cache: write
through
Apr 8 15:27:16 node1 kernel: SCSI device sdd: 560557312 512-byte hdwr
sectors (287005 MB)
Apr 8 15:27:16 node1 kernel: sdd: Write Protect is off
Apr 8 15:27:17 node1 kernel: SCSI device sdd: drive cache: write
through
Apr 8 15:27:17 node1 kernel: sdd: sdd1
Apr 8 15:27:17 node1 kernel: sd 1:0:1:0: Attached scsi disk sdd
Apr 8 15:27:17 node1 kernel: GSI 18 sharing vector 0x4A and IRQ 18
Apr 8 15:27:17 node1 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] ->
GSI 21 (level, low) -> IRQ 74
Apr 8 15:27:17 node1 kernel: ehci_hcd 0000:00:1d.7: EHCI Host
Controller
Apr 8 15:27:17 node1 kernel: ehci_hcd 0000:00:1d.7: new USB bus
registered, assigned bus number 1
Apr 8 15:27:17 node1 kernel: ehci_hcd 0000:00:1d.7: debug port 1
Apr 8 15:27:17 node1 kernel: ehci_hcd 0000:00:1d.7: irq 74, io mem
0xfc900000
Apr 8 15:27:17 node1 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started,
EHCI 1.00, driver 10 Dec 2004
Apr 8 15:27:17 node1 kernel: usb usb1: configuration #1 chosen from 1
choice
Apr 8 15:27:17 node1 kernel: hub 1-0:1.0: USB hub found
Apr 8 15:27:17 node1 kernel: hub 1-0:1.0: 8 ports detected
Apr 8 15:27:17 node1 kernel: USB Universal Host Controller Interface
driver v3.0
Apr 8 15:27:17 node1 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] ->
GSI 21 (level, low) -> IRQ 74
Apr 8 15:27:17 node1 kernel: uhci_hcd 0000:00:1d.0: UHCI Host
Controller
Apr 8 15:27:17 node1 kernel: uhci_hcd 0000:00:1d.0: new USB bus
registered, assigned bus number 2
Apr 8 15:27:17 node1 kernel: uhci_hcd 0000:00:1d.0: irq 74, io base
0x0000ace0
Apr 8 15:27:17 node1 kernel: usb usb2: configuration #1 chosen from 1
choice
Apr 8 15:27:17 node1 kernel: hub 2-0:1.0: USB hub found
Apr 8 15:27:17 node1 kernel: hub 2-0:1.0: 2 ports detected
Apr 8 15:27:17 node1 kernel: GSI 19 sharing vector 0x52 and IRQ 19
Apr 8 15:27:17 node1 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] ->
GSI 20 (level, low) -> IRQ 82
Apr 8 15:27:17 node1 kernel: uhci_hcd 0000:00:1d.1: UHCI Host
Controller
Apr 8 15:27:17 node1 kernel: uhci_hcd 0000:00:1d.1: new USB bus
registered, assigned bus number 3
Apr 8 15:27:17 node1 kernel: uhci_hcd 0000:00:1d.1: irq 82, io base
0x0000acc0
Apr 8 15:27:18 node1 kernel: usb usb3: configuration #1 chosen from 1
choice
Apr 8 15:27:18 node1 kernel: hub 3-0:1.0: USB hub found
Apr 8 15:27:18 node1 kernel: hub 3-0:1.0: 2 ports detected
Apr 8 15:27:18 node1 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] ->
GSI 21 (level, low) -> IRQ 74
Apr 8 15:27:18 node1 kernel: uhci_hcd 0000:00:1d.2: UHCI Host
Controller
Apr 8 15:27:18 node1 kernel: uhci_hcd 0000:00:1d.2: new USB bus
registered, assigned bus number 4
Apr 8 15:27:18 node1 kernel: uhci_hcd 0000:00:1d.2: irq 74, io base
0x0000aca0
Apr 8 15:27:18 node1 kernel: usb usb4: configuration #1 chosen from 1
choice
Apr 8 15:27:18 node1 kernel: hub 4-0:1.0: USB hub found
Apr 8 15:27:18 node1 kernel: hub 4-0:1.0: 2 ports detected
Apr 8 15:27:18 node1 kernel: usb 1-1: new high speed USB device using
ehci_hcd and address 2
Apr 8 15:27:18 node1 kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] ->
GSI 20 (level, low) -> IRQ 82
Apr 8 15:27:18 node1 kernel: uhci_hcd 0000:00:1d.3: UHCI Host
Controller
Apr 8 15:27:18 node1 kernel: uhci_hcd 0000:00:1d.3: new USB bus
registered, assigned bus number 5
Apr 8 15:27:18 node1 kernel: uhci_hcd 0000:00:1d.3: irq 82, io base
0x0000ac80
Apr 8 15:27:18 node1 kernel: usb usb5: configuration #1 chosen from 1
choice
Apr 8 15:27:18 node1 kernel: hub 5-0:1.0: USB hub found
Apr 8 15:27:18 node1 kernel: hub 5-0:1.0: 2 ports detected
Apr 8 15:27:18 node1 kernel: usb 1-1: configuration #1 chosen from 1
choice
Apr 8 15:27:18 node1 kernel: hub 1-1:1.0: USB hub found
Apr 8 15:27:18 node1 kernel: hub 1-1:1.0: 2 ports detected
Apr 8 15:27:18 node1 kernel: megasas: 00.00.03.15-RH1 Wed Nov. 21
10:29:45 PST 2007
Apr 8 15:27:18 node1 kernel: megasas: 0x1000:0x0060:0x1028:0x1f0c:
bus 1:slot 0:func 0
Apr 8 15:27:18 node1 kernel: ACPI: PCI Interrupt 0000:01:00.0[A] ->
GSI 16 (level, low) -> IRQ 169
Apr 8 15:27:18 node1 kernel: megasas: FW now in Ready state
Apr 8 15:27:18 node1 kernel: scsi2 : LSI SAS based MegaRAID driver
Apr 8 15:27:18 node1 kernel: Vendor: FUJITSU Model:
MBC2073RC Rev: D506
Apr 8 15:27:19 node1 kernel: Type: Direct-
Access ANSI SCSI revision: 05
Apr 8 15:27:19 node1 kernel: Vendor: FUJITSU Model:
MBC2073RC Rev: D506
Apr 8 15:27:19 node1 kernel: Type: Direct-
Access ANSI SCSI revision: 05
Apr 8 15:27:19 node1 kernel: Vendor: DP Model:
BACKPLANE Rev: 1.05
Apr 8 15:27:19 node1 kernel: Type:
Enclosure ANSI SCSI revision: 05
Apr 8 15:27:19 node1 kernel: Vendor: DELL Model: PERC 6/
i Rev: 1.11
Apr 8 15:27:19 node1 kernel: Type: Direct-
Access ANSI SCSI revision: 05
Apr 8 15:27:19 node1 kernel: SCSI device sde: 142082048 512-byte hdwr
sectors (72746 MB)
Apr 8 15:27:19 node1 kernel: sde: Write Protect is off
Apr 8 15:27:19 node1 kernel: SCSI device sde: drive cache: write back
Apr 8 15:27:19 node1 kernel: SCSI device sde: 142082048 512-byte hdwr
sectors (72746 MB)
Apr 8 15:27:19 node1 kernel: sde: Write Protect is off
Apr 8 15:27:19 node1 kernel: SCSI device sde: drive cache: write back
Apr 8 15:27:19 node1 kernel: sde: sde1 sde2 sde3 sde4 < sde5 sde6
sde7 sde8 >
Apr 8 15:27:19 node1 kernel: sd 2:2:0:0: Attached scsi disk sde
Apr 8 15:27:19 node1 kernel: Initializing USB Mass Storage driver...
Apr 8 15:27:19 node1 kernel: usb 1-5: new high speed USB device using
ehci_hcd and address 3
Apr 8 15:27:19 node1 kernel: usb 1-5: configuration #1 chosen from 1
choice
Apr 8 15:27:19 node1 kernel: hub 1-5:1.0: USB hub found
Apr 8 15:27:19 node1 kernel: hub 1-5:1.0: 4 ports detected
Apr 8 15:27:19 node1 kernel: usb 1-1.1: new full speed USB device
using ehci_hcd and address 4
Apr 8 15:27:19 node1 kernel: usb 1-1.1: configuration #1 chosen from
1 choice
Apr 8 15:27:19 node1 kernel: input: Dell DRAC5 as /class/input/input0
Apr 8 15:27:19 node1 kernel: input: USB HID v1.10 Keyboard [Dell
DRAC5] on usb-0000:00:1d.7-1.1
Apr 8 15:27:19 node1 kernel: input: Dell DRAC5 as /class/input/input1
Apr 8 15:27:19 node1 kernel: input: USB HID v1.10 Mouse [Dell DRAC5]
on usb-0000:00:1d.7-1.1
Apr 8 15:27:20 node1 kernel: usb 1-1.2: new high speed USB device
using ehci_hcd and address 5
Apr 8 15:27:20 node1 kernel: usb 1-1.2: configuration #1 chosen from
1 choice
Apr 8 15:27:20 node1 kernel: scsi3 : SCSI emulation for USB Mass
Storage devices
Apr 8 15:27:20 node1 kernel: scsi4 : SCSI emulation for USB Mass
Storage devices
Apr 8 15:27:20 node1 kernel: usbcore: registered new driver usb-
storage
Apr 8 15:27:20 node1 kernel: USB Mass Storage support registered.
Apr 8 15:27:20 node1 kernel: Vendor: Dell Model: Virtual
CDROM Rev: 123
Apr 8 15:27:20 node1 kernel: Type: CD-
ROM ANSI SCSI revision: 00
Apr 8 15:27:20 node1 kernel: Vendor: Dell Model: Virtual
Floppy Rev: 123
Apr 8 15:27:20 node1 kernel: Type: Direct-
Access ANSI SCSI revision: 00
Apr 8 15:27:20 node1 kernel: sd 4:0:0:0: Attached scsi removable disk
sdf
Apr 8 15:27:20 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:20 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:20 node1 kernel:
Apr 8 15:27:20 node1 kernel: end_request: I/O error, dev sdc, sector
560557184
Apr 8 15:27:20 node1 kernel: printk: 9 messages suppressed.
Apr 8 15:27:20 node1 kernel: Buffer I/O error on device sdc, logical
block 70069648
Apr 8 15:27:20 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:20 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:20 node1 kernel:
Apr 8 15:27:20 node1 kernel: end_request: I/O error, dev sdc, sector
560557184
Apr 8 15:27:20 node1 kernel: Buffer I/O error on device sdc, logical
block 70069648
Apr 8 15:27:20 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:20 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:20 node1 kernel:
Apr 8 15:27:21 node1 kernel: end_request: I/O error, dev sdc, sector
0
Apr 8 15:27:21 node1 kernel: Buffer I/O error on device sdc, logical
block 0
Apr 8 15:27:21 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:21 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:21 node1 kernel:
Apr 8 15:27:21 node1 kernel: end_request: I/O error, dev sdc, sector
8
Apr 8 15:27:21 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:21 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:21 node1 kernel:
Apr 8 15:27:21 node1 kernel: end_request: I/O error, dev sdc, sector
0
Apr 8 15:27:21 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:21 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:21 node1 kernel:
Apr 8 15:27:21 node1 kernel: end_request: I/O error, dev sda, sector
560557184
Apr 8 15:27:21 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:21 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:21 node1 kernel:
Apr 8 15:27:21 node1 kernel: end_request: I/O error, dev sda, sector
560557184
Apr 8 15:27:21 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:21 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:21 node1 kernel:
Apr 8 15:27:21 node1 kernel: end_request: I/O error, dev sda, sector
0
Apr 8 15:27:21 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:21 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:21 node1 kernel:
Apr 8 15:27:21 node1 kernel: end_request: I/O error, dev sda, sector
8
Apr 8 15:27:21 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:21 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:22 node1 kernel:
Apr 8 15:27:22 node1 kernel: end_request: I/O error, dev sda, sector
0
Apr 8 15:27:22 node1 kernel: kjournald starting. Commit interval 5
seconds
Apr 8 15:27:22 node1 kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Apr 8 15:27:22 node1 kernel: SELinux: Disabled at runtime.
Apr 8 15:27:22 node1 kernel: e1000e: Intel(R) PRO/1000 Network Driver
- 0.2.0
Apr 8 15:27:22 node1 kernel: e1000e: Copyright (c) 1999-2007 Intel
Corporation.
Apr 8 15:27:22 node1 kernel: ACPI: PCI Interrupt 0000:0a:00.0[A] ->
GSI 16 (level, low) -> IRQ 169
Apr 8 15:27:22 node1 kernel: sd 0:0:0:0: Attached scsi generic sg0
type 0
Apr 8 15:27:22 node1 kernel: sd 0:0:1:0: Attached scsi generic sg1
type 0
Apr 8 15:27:22 node1 kernel: sd 1:0:0:0: Attached scsi generic sg2
type 0
Apr 8 15:27:22 node1 kernel: sd 1:0:1:0: Attached scsi generic sg3
type 0
Apr 8 15:27:22 node1 kernel: scsi 2:0:32:0: Attached scsi generic sg4
type 13
Apr 8 15:27:22 node1 kernel: sd 2:2:0:0: Attached scsi generic sg5
type 0
Apr 8 15:27:22 node1 kernel: scsi 3:0:0:0: Attached scsi generic sg6
type 5
Apr 8 15:27:22 node1 kernel: sd 4:0:0:0: Attached scsi generic sg7
type 0
Apr 8 15:27:22 node1 kernel: input: PC Speaker as /class/input/input2
Apr 8 15:27:22 node1 kernel: EDAC MC: Ver: 2.0.1 May 23 2008
Apr 8 15:27:22 node1 kernel: 0000:00:04.0: eth0: (PCI Express:2.5GB/
s:Width x4) 00:15:17:7d:cc:32
Apr 8 15:27:22 node1 kernel: 0000:00:04.0: eth0: Intel(R) PRO/1000
Network Connection
Apr 8 15:27:22 node1 kernel: 0000:00:04.0: eth0: MAC: 0, PHY: 4, PBA
No: c57721-005
Apr 8 15:27:22 node1 kernel: ACPI: PCI Interrupt 0000:0a:00.1[B] ->
GSI 17 (level, low) -> IRQ 66
Apr 8 15:27:22 node1 kernel: intel_rng: FWH not detected
Apr 8 15:27:22 node1 kernel: hda: ATAPI 24X DVD-ROM drive, 198kB
Cache, UDMA(33)
Apr 8 15:27:22 node1 kernel: Uniform CD-ROM driver Revision: 3.20
Apr 8 15:27:22 node1 kernel: 0000:00:04.0: eth1: (PCI Express:2.5GB/
s:Width x4) 00:15:17:7d:cc:33
Apr 8 15:27:23 node1 kernel: 0000:00:04.0: eth1: Intel(R) PRO/1000
Network Connection
Apr 8 15:27:23 node1 kernel: 0000:00:04.0: eth1: MAC: 0, PHY: 4, PBA
No: c57721-005
Apr 8 15:27:23 node1 kernel: shpchp: Standard Hot Plug PCI Controller
Driver version: 0.4
Apr 8 15:27:23 node1 kernel: EDAC MC0: Giving out device to
i5000_edac.c I5000: DEV 0000:00:10.0
Apr 8 15:27:23 node1 kernel: Broadcom NetXtreme II Gigabit Ethernet
Driver bnx2 v1.6.9 (December 8, 2007)
Apr 8 15:27:23 node1 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] ->
GSI 16 (level, low) -> IRQ 169
Apr 8 15:27:23 node1 kernel: eth2: Broadcom NetXtreme II BCM5708
1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 169,
node addr 001ec9b285f5
Apr 8 15:27:23 node1 kernel: ACPI: PCI Interrupt 0000:07:00.0[A] ->
GSI 16 (level, low) -> IRQ 169
Apr 8 15:27:23 node1 kernel: eth3: Broadcom NetXtreme II BCM5708
1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 169,
node addr 001ec9b285f7
Apr 8 15:27:23 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:23 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:23 node1 kernel:
Apr 8 15:27:23 node1 kernel: end_request: I/O error, dev sdc, sector
560557184
Apr 8 15:27:23 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:23 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:23 node1 kernel:
Apr 8 15:27:23 node1 kernel: end_request: I/O error, dev sdc, sector
560557184
Apr 8 15:27:23 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:23 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:23 node1 kernel:
Apr 8 15:27:23 node1 kernel: end_request: I/O error, dev sdc, sector
560557304
Apr 8 15:27:23 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:23 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:23 node1 kernel:
Apr 8 15:27:23 node1 kernel: end_request: I/O error, dev sdc, sector
560557304
Apr 8 15:27:23 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:23 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:23 node1 kernel:
Apr 8 15:27:24 node1 kernel: end_request: I/O error, dev sdc, sector
560557304
Apr 8 15:27:24 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:24 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:24 node1 kernel:
Apr 8 15:27:24 node1 kernel: end_request: I/O error, dev sdc, sector
560557304
Apr 8 15:27:24 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:24 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:24 node1 kernel:
Apr 8 15:27:24 node1 kernel: end_request: I/O error, dev sdc, sector
560557304
Apr 8 15:27:24 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:24 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:24 node1 kernel:
Apr 8 15:27:24 node1 kernel: end_request: I/O error, dev sdc, sector
560557304
Apr 8 15:27:24 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:24 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:24 node1 kernel:
Apr 8 15:27:24 node1 kernel: end_request: I/O error, dev sdc, sector
560557248
Apr 8 15:27:24 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:24 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:24 node1 kernel:
Apr 8 15:27:24 node1 kernel: end_request: I/O error, dev sdc, sector
560557296
Apr 8 15:27:24 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:24 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:24 node1 kernel:
Apr 8 15:27:24 node1 kernel: end_request: I/O error, dev sdc, sector
560557304
Apr 8 15:27:24 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:24 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27:24 node1 kernel:
Apr 8 15:27:25 node1 kernel: end_request: I/O error, dev sdc, sector
560557304
Apr 8 15:27:25 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
Current: sense key: Not Ready
Apr 8 15:27:25 node1 kernel: Add. Sense: Logical unit not ready,
manual intervention required
Apr 8 15:27...(message truncated) |
|
| Back to top |
|
 | |
External
Since: May 31, 2004
Posts: 104
|
(Msg. 2) Posted: Mon Apr 13, 2009 5:15 pm
Post subject: Re: 10g clusterware causes reboots [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
The Derfer wrote:
> I have Linux (OEL5.2) running 10g clusterware on 2 nodes.
> OCFS2 is running as well, with a SAN-based OCFS2 filesystem
> mounted on both hosts (written to by only one until the other fails
> over).
>
> When I reboot one host, the ethernet interface eth0:2 appears on the
> other, assuming the VIP of the downed host.
> But then when that host comes back up, the 2nd host reboots
> itself outright. Has anyone seen this behavior in either
> clusterware or OCFS2 before? Oracle engineers claim it's
> OCFS2 doing this but I'm not sure. Why would wither host
> reboot at all without me doing the rebooting?
>
> Some lines from dmesg on the first host:
>
> Apr 8 12:04:35 node1 kernel: 0000:00:04.0: eth3: Link is Down
> Apr 8 12:04:38 node1 kernel: o2net: no longer connected to node node2
> (num 1) at 10.156.90.62:7777
> Apr 8 12:04:41 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
> Full Duplex, Flow Control: RX/TX
> Apr 8 12:05:08 node1 kernel: (3485,0):o2net_connect_expired:1637
> ERROR: no connection established with node 1 after 30.0 seconds,
> giving up and returning errors.
> Apr 8 12:05:13 node1 kernel: (3606,0):dlm_send_proxy_ast_msg:457
> ERROR: status = -107
> Apr 8 12:05:13 node1 kernel: (3606,0):dlm_flush_asts:584 ERROR:
> status = -107
> Apr 8 12:05:13 node1 kernel: (3606,0):dlm_send_proxy_ast_msg:457
> ERROR: status = -107
> Apr 8 12:05:13 node1 kernel: (3606,0):dlm_flush_asts:584 ERROR:
> status = -107
> Apr 8 12:05:13 node1 kernel: (3606,0):dlm_send_proxy_ast_msg:457
> ERROR: status = -107
> Apr 8 12:05:13 node1 kernel: (3606,0):dlm_flush_asts:584 ERROR:
> status = -107
> Apr 8 12:05:38 node1 kernel: (3485,0):o2net_connect_expired:1637
> ERROR: no connection established with node 1 after 30.0 seconds,
> giving up and returning errors.
> Apr 8 12:05:47 node1 kernel: 0000:00:04.0: eth3: Link is Down
> Apr 8 12:05:49 node1 kernel: 0000:00:04.0: eth3: Link is Up 10 Mbps
> Full Duplex, Flow Control: RX/TX
> Apr 8 12:05:49 node1 kernel: 0000:00:04.0: eth3: 10/100 speed:
> disabling TSO
> Apr 8 12:06:06 node1 kernel: 0000:00:04.0: eth3: Link is Down
> Apr 8 12:06:08 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
> Full Duplex, Flow Control: RX/TX
> Apr 8 12:06:08 node1 kernel: (3485,0):o2net_connect_expired:1637
> ERROR: no connection established with node 1 after 30.0 seconds,
> giving up and returning errors.
> Apr 8 12:06:38 node1 kernel: (3485,0):o2net_connect_expired:1637
> ERROR: no connection established with node 1 after 30.0 seconds,
> giving up and returning errors.
> Apr 8 12:06:48 node1 kernel: (3591,1):ocfs2_dlm_eviction_cb:98 device
> (120,1): dlm has evicted node 1
> Apr 8 12:06:48 node1 kernel: (14161,1):dlm_get_lock_resource:839
> 3930352DB2134782B730C44078E58F29:M000000000000000000001957f095b1: at
> least one node (1) to recover before lock mastery can begin
> Apr 8 12:06:49 node1 kernel: (14161,1):dlm_get_lock_resource:893
> 3930352DB2134782B730C44078E58F29:M000000000000000000001957f095b1: at
> least one node (1) to recover before lock mastery can begin
> Apr 8 12:06:50 node1 kernel: (3607,1):dlm_get_lock_resource:839
> 3930352DB2134782B730C44078E58F29:$RECOVERY: at least one node (1) to
> recover before lock mastery can begin
> Apr 8 12:06:50 node1 kernel: (3607,1):dlm_get_lock_resource:873
> 3930352DB2134782B730C44078E58F29: recovery map is not empty, but must
> master $RECOVERY lock now
> Apr 8 12:06:50 node1 kernel: (3607,1):dlm_do_recovery:524 (3607) Node
> 0 is the Recovery Master for the Dead Node 1 for Domain
> 3930352DB2134782B730C44078E58F29
> Apr 8 12:07:00 node1 kernel: (14161,1):ocfs2_replay_journal:1076
> Recovering node 1 from slot 1 on device (120,1)
> Apr 8 12:07:02 node1 kernel: kjournald starting. Commit interval 5
> seconds
> Apr 8 12:07:35 node1 sshd[14480]: Accepted password for fbaker from
> 10.156.20.20 port 48972 ssh2
> Apr 8 12:08:25 node1 kernel: 0000:00:04.0: eth3: Link is Down
> Apr 8 12:08:27 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
> Full Duplex, Flow Control: RX/TX
> Apr 8 12:08:44 node1 kernel: 0000:00:04.0: eth3: Link is Down
> Apr 8 12:08:46 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
> Full Duplex, Flow Control: RX/TX
> Apr 8 12:08:57 node1 kernel: o2net: accepted connection from node
> node2 (num 1) at 10.156.90.62:7777
> Apr 8 12:09:01 node1 kernel: ocfs2_dlm: Node 1 joins domain
> 3930352DB2134782B730C44078E58F29
> Apr 8 12:09:01 node1 kernel: ocfs2_dlm: Nodes in domain
> ("3930352DB2134782B730C44078E58F29"): 0 1
> Apr 8 13:47:46 node1 sshd[17710]: Accepted password for btsvetko from
> 10.156.20.20 port 50015 ssh2
> Apr 8 13:55:50 node1 sshd[20717]: Failed password for dmaki from
> 10.156.20.20 port 50108 ssh2
> Apr 8 13:55:58 node1 sshd[20717]: Accepted password for dmaki from
> 10.156.20.20 port 50108 ssh2
> Apr 8 13:55:58 node1 sshd[20808]: subsystem request for sftp
> Apr 8 13:57:20 node1 sshd[21307]: Accepted password for dmaki from
> 10.156.20.20 port 50124 ssh2
> Apr 8 14:20:11 node1 kernel: bnx2: eth0: using MSI
> Apr 8 14:20:11 node1 kernel: ADDRCONF(NETDEV_UP): eth0: link is not
> ready
> Apr 8 14:20:14 node1 kernel: bnx2: eth0 NIC Copper Link is Up, 1000
> Mbps full duplex, receive & transmit flow control ON
> Apr 8 14:20:14 node1 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link
> becomes ready
> Apr 8 14:20:15 node1 kernel: ADDRCONF(NETDEV_UP): eth3: link is not
> ready
> Apr 8 14:20:16 node1 kernel: o2net: no longer connected to node node2
> (num 1) at 10.156.90.62:7777
> Apr 8 14:20:17 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
> Full Duplex, Flow Control: RX/TX
> Apr 8 14:20:17 node1 kernel: ADDRCONF(NETDEV_CHANGE): eth3: link
> becomes ready
> Apr 8 14:20:46 node1 kernel: (3485,0):o2net_connect_expired:1637
> ERROR: no connection established with node 1 after 30.0 seconds,
> giving up and returning errors.
> Apr 8 14:21:14 node1 kernel: (3606,2):dlm_send_proxy_ast_msg:457
> ERROR: status = -107
> Apr 8 14:21:14 node1 kernel: (3606,2):dlm_flush_asts:584 ERROR:
> status = -107
> Apr 8 14:21:14 node1 kernel: (3606,2):dlm_send_proxy_ast_msg:457
> ERROR: status = -107
> Apr 8 14:21:14 node1 kernel: (3606,2):dlm_flush_asts:584 ERROR:
> status = -107
> Apr 8 14:21:14 node1 kernel: (3606,2):dlm_send_proxy_ast_msg:457
> ERROR: status = -107
> Apr 8 14:21:14 node1 kernel: (3606,2):dlm_flush_asts:584 ERROR:
> status = -107
> Apr 8 14:21:16 node1 kernel: (3485,0):o2net_connect_expired:1637
> ERROR: no connection established with node 1 after 30.0 seconds,
> giving up and returning errors.
> Apr 8 14:21:20 node1 kernel: 0000:00:04.0: eth3: Link is Down
> Apr 8 14:21:22 node1 kernel: 0000:00:04.0: eth3: Link is Up 10 Mbps
> Full Duplex, Flow Control: RX/TX
> Apr 8 14:21:22 node1 kernel: 0000:00:04.0: eth3: 10/100 speed:
> disabling TSO
> Apr 8 14:21:40 node1 kernel: 0000:00:04.0: eth3: Link is Down
> Apr 8 14:21:42 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
> Full Duplex, Flow Control: RX/TX
> Apr 8 14:21:46 node1 kernel: (3485,0):o2net_connect_expired:1637
> ERROR: no connection established with node 1 after 30.0 seconds,
> giving up and returning errors.
> Apr 8 14:22:16 node1 kernel: (3485,0):o2net_connect_expired:1637
> ERROR: no connection established with node 1 after 30.0 seconds,
> giving up and returning errors.
> Apr 8 14:22:22 node1 kernel: (3591,1):ocfs2_dlm_eviction_cb:98 device
> (120,1): dlm has evicted node 1
> Apr 8 14:22:22 node1 kernel: (30933,1):ocfs2_replay_journal:1076
> Recovering node 1 from slot 1 on device (120,1)
> Apr 8 14:22:23 node1 kernel: kjournald starting. Commit interval 5
> seconds
> Apr 8 14:22:23 node1 kernel: (3603,1):dlm_get_lock_resource:839
> 3930352DB2134782B730C44078E58F29:M000000000000000000000d57f095b1: at
> least one node (1) to recover before lock mastery can begin
> Apr 8 14:22:24 node1 kernel: (3603,1):dlm_get_lock_resource:893
> 3930352DB2134782B730C44078E58F29:M000000000000000000000d57f095b1: at
> least one node (1) to recover before lock mastery can begin
> Apr 8 14:22:25 node1 kernel: (3607,1):dlm_get_lock_resource:839
> 3930352DB2134782B730C44078E58F29:$RECOVERY: at least one node (1) to
> recover before lock mastery can begin
> Apr 8 14:22:25 node1 kernel: (3607,1):dlm_get_lock_resource:873
> 3930352DB2134782B730C44078E58F29: recovery map is not empty, but must
> master $RECOVERY lock now
> Apr 8 14:22:25 node1 kernel: (3607,1):dlm_do_recovery:524 (3607) Node
> 0 is the Recovery Master for the Dead Node 1 for Domain
> 3930352DB2134782B730C44078E58F29
> Apr 8 14:23:59 node1 kernel: 0000:00:04.0: eth3: Link is Down
> Apr 8 14:24:01 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
> Full Duplex, Flow Control: RX/TX
> Apr 8 14:24:17 node1 kernel: 0000:00:04.0: eth3: Link is Down
> Apr 8 14:24:19 node1 kernel: 0000:00:04.0: eth3: Link is Up 1000 Mbps
> Full Duplex, Flow Control: RX/TX
> Apr 8 14:24:30 node1 kernel: o2net: accepted connection from node
> node2 (num 1) at 10.156.90.62:7777
> Apr 8 14:24:34 node1 kernel: ocfs2_dlm: Node 1 joins domain
> 3930352DB2134782B730C44078E58F29
> Apr 8 14:24:34 node1 kernel: ocfs2_dlm: Nodes in domain
> ("3930352DB2134782B730C44078E58F29"): 0 1
> Apr 8 14:26:01 node1 sshd[32356]: Accepted password for fbaker from
> 10.156.20.20 port 50752 ssh2
> Apr 8 15:21:27 node1 sshd[19725]: Accepted password for fbaker from
> 10.156.20.20 port 51383 ssh2
> Apr 8 15:24:52 node1 kernel: ocfs2_hb_ctl[21047]: segfault at
> 0000000000000000 rip 0000000000428fa0 rsp 00007fff77c60688 error 4
> Apr 8 15:24:52 node1 kernel: ocfs2: Unmounting device (120,1) on
> (node 0)
> Apr 8 15:24:53 node1 xinetd[3676]: Exiting...
> Apr 8 15:24:56 node1 ntpd[3694]: ntpd exiting on signal 15
> Apr 8 15:24:56 node1 rpc.statd[3421]: Caught signal 15, un-
> registering and exiting.
> Apr 8 15:24:56 node1 portmap[21164]: connect from 127.0.0.1 to unset
> (status): request from unprivileged port
> Apr 8 15:24:57 node1 auditd[3036]: The audit daemon is exiting.
> Apr 8 15:24:57 node1 kernel: printk: 233 messages suppressed.
> Apr 8 15:24:57 node1 kernel: audit(1239218697.229:9819): audit_pid=0
> old=3036 by auid=4294967295
> Apr 8 15:24:57 node1 kernel: Kernel logging (proc) stopped.
> Apr 8 15:24:57 node1 kernel: Kernel log daemon terminating.
> Apr 8 15:24:58 node1 exiting on signal 15
> Apr 8 15:26:58 node1 syslogd 1.4.1: restart.
> Apr 8 15:26:58 node1 kernel: klogd 1.4.1, log source = /proc/kmsg
> started.
> Apr 8 15:26:58 node1 kernel: Linux version 2.6.18-92.el5
> (mockbuild@ca-build15.us.oracle.com) (gcc version 4.1.2 20071124 (Red
> Hat 4.1.2-41)) #1 SMP Fri May 23 23:40:43 EDT 2008
> Apr 8 15:26:58 node1 kernel: Command line: ro root=LABEL=/ rhgb quiet
> Apr 8 15:26:58 node1 kernel: BIOS-provided physical RAM map:
> Apr 8 15:26:58 node1 kernel: BIOS-e820: 0000000000000000 -
> 00000000000a0000 (usable)
> Apr 8 15:26:58 node1 kernel: BIOS-e820: 0000000000100000 -
> 00000000cfb50000 (usable)
> Apr 8 15:26:58 node1 kernel: BIOS-e820: 00000000cfb50000 -
> 00000000cfb66000 (reserved)
> Apr 8 15:26:58 node1 kernel: BIOS-e820: 00000000cfb66000 -
> 00000000cfb85c00 (ACPI data)
> Apr 8 15:26:58 node1 kernel: BIOS-e820: 00000000cfb85c00 -
> 00000000d0000000 (reserved)
> Apr 8 15:26:58 node1 kernel: BIOS-e820: 00000000e0000000 -
> 00000000f0000000 (reserved)
> Apr 8 15:26:58 node1 kernel: BIOS-e820: 00000000fe000000 -
> 0000000100000000 (reserved)
> Apr 8 15:26:58 node1 kernel: BIOS-e820: 0000000100000000 -
> 0000000130000000 (usable)
> Apr 8 15:26:58 node1 kernel: DMI 2.5 present.
> Apr 8 15:26:58 node1 rpc.statd[3348]: Version 1.0.9 Starting
> Apr 8 15:26:58 node1 modprobe: FATAL: Module ocfs2_stackglue not
> found.
> Apr 8 15:26:59 node1 kernel: No NUMA configuration found
> Apr 8 15:26:59 node1 kernel: Faking a node at
> 0000000000000000-0000000130000000
> Apr 8 15:26:59 node1 kernel: Bootmem setup node 0
> 0000000000000000-0000000130000000
> Apr 8 15:26:59 node1 kernel: Memory for crash kernel (0x0 to 0x0)
> notwithin permissible range
> Apr 8 15:26:59 node1 kernel: disabling kdump
> Apr 8 15:26:59 node1 kernel: ACPI: PM-Timer IO Port: 0x808
> Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id
> [0x00] enabled)
> Apr 8 15:26:59 node1 kernel: Processor #0 7:7 APIC version 20
> Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id
> [0x02] enabled)
> Apr 8 15:26:59 node1 kernel: Processor #2 7:7 APIC version 20
> Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id
> [0x01] enabled)
> Apr 8 15:26:59 node1 kernel: Processor #1 7:7 APIC version 20
> Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id
> [0x03] enabled)
> Apr 8 15:26:59 node1 kernel: Processor #3 7:7 APIC version 20
> Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id
> [0x14] disabled)
> Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id
> [0x15] disabled)
> Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id
> [0x16] disabled)
> Apr 8 15:26:59 node1 kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id
> [0x17] disabled)
> Apr 8 15:26:59 node1 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge
> lint[0x1])
> Apr 8 15:26:59 node1 kernel: ACPI: IOAPIC (id[0x04] address
> [0xfec00000] gsi_base[0])
> Apr 8 15:26:59 node1 kernel: IOAPIC[0]: apic_id 4, version 32,
> address 0xfec00000, GSI 0-23
> Apr 8 15:26:59 node1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0
> global_irq 2 dfl dfl)
> Apr 8 15:26:59 node1 EV_AGENT[3437]: Line Not Parsed, Line#108
> search /user root - Application and revision : @(#) libraid++ Revision
> 6.26.2.0.2 for Linux on 12/5/2007 8:12:01, Error Origination:
> EV_ConfigInfoFileManager::_parseConfigfile()
> Apr 8 15:26:59 node1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9
> global_irq 9 high level)
> Apr 8 15:26:59 node1 kernel: Setting APIC routing to physical flat
> Apr 8 15:27:00 node1 kernel: ACPI: HPET id: 0x8086a201 base:
> 0xfed00000
> Apr 8 15:27:00 node1 kernel: Using ACPI (MADT) for SMP configuration
> information
> Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000000a0000 -
> 0000000000100000
> Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000cfb50000 -
> 00000000cfb66000
> Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000cfb66000 -
> 00000000cfb85000
> Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000cfb85000 -
> 00000000cfb86000
> Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000cfb86000 -
> 00000000d0000000
> Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000d0000000 -
> 00000000e0000000
> Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000e0000000 -
> 00000000f0000000
> Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000f0000000 -
> 00000000fe000000
> Apr 8 15:27:00 node1 kernel: Nosave address range: 00000000fe000000 -
> 0000000100000000
> Apr 8 15:27:00 node1 kernel: Allocating PCI resources starting at
> d1000000 (gap: d0000000:10000000)
> Apr 8 15:27:00 node1 kernel: SMP: Allowing 8 CPUs, 4 hotplug CPUs
> Apr 8 15:27:00 node1 kernel: Built 1 zonelists. Total pages: 1029006
> Apr 8 15:27:00 node1 kernel: Kernel command line: ro root=LABEL=/
> rhgb quiet
> Apr 8 15:27:00 node1 kernel: Initializing CPU#0
> Apr 8 15:27:00 node1 kernel: PID hash table entries: 4096 (order: 12,
> 32768 bytes)
> Apr 8 15:27:00 node1 kernel: Console: colour VGA+ 80x25
> Apr 8 15:27:00 node1 kernel: Dentry cache hash table entries: 524288
> (order: 10, 4194304 bytes)
> Apr 8 15:27:00 node1 kernel: Inode-cache hash table entries: 262144
> (order: 9, 2097152 bytes)
> Apr 8 15:27:00 node1 kernel: Checking aperture...
> Apr 8 15:27:00 node1 kernel: PCI-DMA: Using software bounce buffering
> for IO (SWIOTLB)
> Apr 8 15:27:00 node1 kernel: Placing software IO TLB between
> 0x165d000 - 0x565d000
> Apr 8 15:27:00 node1 kernel: Memory: 4040256k/4980736k available
> (2457k kernel code, 148864k reserved, 1246k data, 196k init)
> Apr 8 15:27:00 node1 kernel: Calibrating delay using timer specific
> routine.. 5989.09 BogoMIPS (lpj=2994549)
> Apr 8 15:27:00 node1 kernel: Security Framework v1.0.0 initialized
> Apr 8 15:27:00 node1 kernel: SELinux: Initializing.
> Apr 8 15:27:00 node1 kernel: selinux_register_security: Registering
> secondary module capability
> Apr 8 15:27:00 node1 kernel: Capability LSM initialized as secondary
> Apr 8 15:27:01 node1 kernel: Mount-cache hash table entries: 256
> Apr 8 15:27:01 node1 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
> Apr 8 15:27:01 node1 kernel: CPU: L2 cache: 6144K
> Apr 8 15:27:01 node1 kernel: using mwait in idle threads.
> Apr 8 15:27:01 node1 kernel: CPU: Physical Processor ID: 0
> Apr 8 15:27:01 node1 kernel: CPU: Processor Core ID: 0
> Apr 8 15:27:01 node1 kernel: CPU0: Thermal monitoring enabled (TM1)
> Apr 8 15:27:01 node1 kernel: SMP alternatives: switching to UP code
> Apr 8 15:27:01 node1 kernel: ACPI: Core revision 20060707
> Apr 8 15:27:01 node1 kernel: Using local APIC timer interrupts.
> Apr 8 15:27:01 node1 kernel: result 20781505
> Apr 8 15:27:01 node1 kernel: Detected 20.781 MHz APIC timer.
> Apr 8 15:27:01 node1 kernel: SMP alternatives: switching to SMP code
> Apr 8 15:27:01 node1 Navisphere Agent[3437]: Agent initializing with
> pid 3437
> Apr 8 15:27:01 node1 kernel: Booting processor 1/4 APIC 0x2
> Apr 8 15:27:01 node1 kernel: Initializing CPU#1
> Apr 8 15:27:01 node1 kernel: Calibrating delay using timer specific
> routine.. 5985.00 BogoMIPS (lpj=2992504)
> Apr 8 15:27:01 node1 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
> Apr 8 15:27:01 node1 kernel: CPU: L2 cache: 6144K
> Apr 8 15:27:01 node1 kernel: CPU: Physical Processor ID: 0
> Apr 8 15:27:01 node1 kernel: CPU: Processor Core ID: 2
> Apr 8 15:27:01 node1 kernel: CPU1: Thermal monitoring enabled (TM2)
> Apr 8 15:27:01 node1 kernel: Intel(R) Xeon(R) CPU E5450 @
> 3.00GHz stepping 06
> Apr 8 15:27:01 node1 kernel: CPU 1: Syncing TSC to CPU 0.
> Apr 8 15:27:01 node1 kernel: CPU 1: synchronized TSC with CPU 0 (last
> diff -2071 cycles, maxerr 594 cycles)
> Apr 8 15:27:01 node1 kernel: SMP alternatives: switching to SMP code
> Apr 8 15:27:01 node1 kernel: Booting processor 2/4 APIC 0x1
> Apr 8 15:27:01 node1 kernel: Initializing CPU#2
> Apr 8 15:27:02 node1 kernel: Calibrating delay using timer specific
> routine.. 5984.25 BogoMIPS (lpj=2992127)
> Apr 8 15:27:02 node1 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
> Apr 8 15:27:02 node1 kernel: CPU: L2 cache: 6144K
> Apr 8 15:27:02 node1 kernel: CPU: Physical Processor ID: 0
> Apr 8 15:27:02 node1 kernel: CPU: Processor Core ID: 1
> Apr 8 15:27:02 node1 kernel: CPU2: Thermal monitoring enabled (TM2)
> Apr 8 15:27:02 node1 kernel: Intel(R) Xeon(R) CPU E5450 @
> 3.00GHz stepping 06
> Apr 8 15:27:02 node1 kernel: CPU 2: Syncing TSC to CPU 0.
> Apr 8 15:27:02 node1 kernel: CPU 2: synchronized TSC with CPU 0 (last
> diff -2056 cycles, maxerr 594 cycles)
> Apr 8 15:27:02 node1 kernel: SMP alternatives: switching to SMP code
> Apr 8 15:27:02 node1 kernel: Booting processor 3/4 APIC 0x3
> Apr 8 15:27:02 node1 kernel: Initializing CPU#3
> Apr 8 15:27:02 node1 kernel: Calibrating delay using timer specific
> routine.. 5985.00 BogoMIPS (lpj=2992504)
> Apr 8 15:27:02 node1 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
> Apr 8 15:27:02 node1 EV_AGENT[3493]: Agent daemon process created,
> pid 3493
> Apr 8 15:27:02 node1 kernel: CPU: L2 cache: 6144K
> Apr 8 15:27:02 node1 EV_AGENT[3493]: Agent has started up.
> Apr 8 15:27:02 node1 kernel: CPU: Physical Processor ID: 0
> Apr 8 15:27:02 node1 kernel: CPU: Processor Core ID: 3
> Apr 8 15:27:02 node1 kernel: CPU3: Thermal monitoring enabled (TM2)
> Apr 8 15:27:02 node1 kernel: Intel(R) Xeon(R) CPU E5450 @
> 3.00GHz stepping 06
> Apr 8 15:27:02 node1 kernel: CPU 3: Syncing TSC to CPU 0.
> Apr 8 15:27:02 node1 kernel: CPU 3: synchronized TSC with CPU 0 (last
> diff -2052 cycles, maxerr 594 cycles)
> Apr 8 15:27:02 node1 kernel: Brought up 4 CPUs
> Apr 8 15:27:02 node1 kernel: testing NMI watchdog ... OK.
> Apr 8 15:27:02 node1 kernel: time.c: Using 14.318180 MHz WALL HPET
> GTOD HPET timer.
> Apr 8 15:27:02 node1 kernel: time.c: Detected 2992.536 MHz processor.
> Apr 8 15:27:03 node1 kernel: migration_cost=18,3689
> Apr 8 15:27:03 node1 kernel: checking if image is initramfs... it is
> Apr 8 15:27:03 node1 kernel: Freeing initrd memory: 2970k freed
> Apr 8 15:27:03 node1 kernel: NET: Registered protocol family 16
> Apr 8 15:27:03 node1 kernel: No dock devices found.
> Apr 8 15:27:03 node1 kernel: ACPI: bus type pci registered
> Apr 8 15:27:03 node1 kernel: PCI: Using MMCONFIG at e0000000
> Apr 8 15:27:03 node1 kernel: PCI: Buses that can't use MMCONFIG will
> use type 1 PCI conf access.
> Apr 8 15:27:03 node1 kernel: ACPI: Interpreter enabled
> Apr 8 15:27:03 node1 kernel: ACPI: Using IOAPIC for interrupt routing
> Apr 8 15:27:03 node1 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
> Apr 8 15:27:03 node1 kernel: PCI: Dell PowerEdge 1950 detected,
> enabling pci=bfsort.
> Apr 8 15:27:03 node1 kernel: PCI: Ignoring BAR0-3 of IDE controller
> 0000:00:1f.1
> Apr 8 15:27:03 node1 kernel: PCI: Transparent bridge - 0000:00:1e.0
> Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK00] (IRQs 3
> 4 5 *6 7 10 11 12)
> Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK01] (IRQs 3
> 4 *5 6 7 10 11 12)
> Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK02] (IRQs 3
> 4 5 6 7 10 11 12) *0, disabled.
> Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK03] (IRQs 3
> 4 5 6 7 10 *11 12)
> Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK04] (IRQs 3
> 4 5 6 7 *10 11 12)
> Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK05] (IRQs 3
> 4 5 6 7 10 *11 12)
> Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK06] (IRQs 3
> 4 5 6 7 10 11 12) *0, disabled.
> Apr 8 15:27:04 node1 kernel: ACPI: PCI Interrupt Link [LK07] (IRQs 3
> 4 5 6 7 10 11 12) *0, disabled.
> Apr 8 15:27:04 node1 kernel: Linux Plug and Play Support v0.97 (c)
> Adam Belay
> Apr 8 15:27:04 node1 kernel: pnp: PnP ACPI init
> Apr 8 15:27:04 node1 kernel: pnp: PnP ACPI: found 12 devices
> Apr 8 15:27:04 node1 kernel: usbcore: registered new driver usbfs
> Apr 8 15:27:04 node1 kernel: usbcore: registered new driver hub
> Apr 8 15:27:04 node1 kernel: PCI: Using ACPI for IRQ routing
> Apr 8 15:27:04 node1 kernel: PCI: If a device doesn't work, try
> "pci=routeirq". If it helps, post a report
> Apr 8 15:27:04 node1 kernel: NetLabel: Initializing
> Apr 8 15:27:04 node1 kernel: NetLabel: domain hash size = 128
> Apr 8 15:27:04 node1 kernel: NetLabel: protocols = UNLABELED CIPSOv4
> Apr 8 15:27:04 node1 kernel: NetLabel: unlabeled traffic allowed by
> default
> Apr 8 15:27:04 node1 kernel: hpet0: at MMIO 0xfed00000 (virtual
> 0xffffffffff5fe000), IRQs 2, 8, 0
> Apr 8 15:27:04 node1 kernel: hpet0: 3 64-bit timers, 14318180 Hz
> Apr 8 15:27:04 node1 kernel: PCI-GART: No AMD northbridge found.
> Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0x800-0x87f
> could not be reserved
> Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0x880-0x8bf has
> been reserved
> Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0x8c0-0x8df has
> been reserved
> Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0x8e0-0x8e3 has
> been reserved
> Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0x900-0x900 has
> been reserved
> Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0xc00-0xc7f has
> been reserved
> Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0xca0-0xca7 has
> been reserved
> Apr 8 15:27:04 node1 kernel: pnp: 00:08: ioport range 0xca9-0xcab has
> been reserved
> Apr 8 15:27:04 node1 kernel: pnp: 00:09: ioport range 0xca8-0xca8 has
> been reserved
> Apr 8 15:27:04 node1 kernel: pnp: 00:09: ioport range 0xcac-0xcac has
> been reserved
> Apr 8 15:27:05 node1 kernel: PCI: Bridge: 0000:06:00.0
> Apr 8 15:27:05 node1 kernel: IO window: disabled.
> Apr 8 15:27:05 node1 kernel: MEM window: f4000000-f7ffffff
> Apr 8 15:27:05 node1 kernel: PREFETCH window: disabled.
> Apr 8 15:27:05 node1 kernel: PCI: Bridge: 0000:05:00.0
> Apr 8 15:27:05 node1 kernel: IO window: disabled.
> Apr 8 15:27:05 node1 kernel: MEM window: f4000000-f7ffffff
> Apr 8 15:27:05 node1 kernel: PREFETCH window: disabled.
> Apr 8 15:27:05 node1 kernel: PCI: Bridge: 0000:05:01.0
> Apr 8 15:27:05 node1 kernel: IO window: disabled.
> Apr 8 15:27:05 node1 kernel: MEM window: disabled.
> Apr 8 15:27:05 node1 kernel: PREFETCH window: disabled.
> Apr 8 15:27:05 node1 kernel: PCI: Bridge: 0000:04:00.0
> Apr 8 15:27:05 node1 kernel: IO window: disabled.
> Apr 8 15:27:05 node1 kernel: MEM window: f4000000-f7ffffff
> Apr 8 15:27:05 node1 kernel: PREFETCH window: disabled.
> Apr 8 15:27:05 node1 kernel: PCI: Bridge: 0000:04:00.3
> Apr 8 15:27:05 node1 kernel: IO window: disabled.
> Apr 8 15:27:05 node1 kernel: MEM window: disabled.
> Apr 8 15:27:05 node1 kernel: PREFETCH window: disabled.
> Apr 8 15:27:05 node1 kernel: PCI: Bridge: 0000:00:02.0
> Apr 8 15:27:05 node1 kernel: IO window: disabled.
> Apr 8 15:27:05 node1 kernel: MEM window: f2000000-f7ffffff
> Apr 8 15:27:05 node1 kernel: PREFETCH window: disabled.
> Apr 8 15:27:05 node1 kernel: PCI: Bridge: 0000:00:03.0
> Apr 8 15:27:05 node1 kernel: IO window: e000-efff
> Apr 8 15:27:05 node1 kernel: MEM window: fc700000-fc8fffff
> Apr 8 15:27:05 node1 kernel: PREFETCH window: disabled.
> Apr 8 15:27:06 node1 kernel: PCI: Bridge: 0000:00:04.0
> Apr 8 15:27:06 node1 kernel: IO window: d000-dfff
> Apr 8 15:27:06 node1 kernel: MEM window: fc500000-fc6fffff
> Apr 8 15:27:06 node1 kernel: PREFETCH window: disabled.
> Apr 8 15:27:06 node1 kernel: PCI: Bridge: 0000:00:05.0
> Apr 8 15:27:06 node1 kernel: IO window: disabled.
> Apr 8 15:27:06 node1 kernel: MEM window: disabled.
> Apr 8 15:27:06 node1 kernel: PREFETCH window: disabled.
> Apr 8 15:27:06 node1 kernel: PCI: Bridge: 0000:00:06.0
> Apr 8 15:27:06 node1 kernel: IO window: c000-cfff
> Apr 8 15:27:06 node1 kernel: MEM window: fc300000-fc4fffff
> Apr 8 15:27:06 node1 kernel: PREFETCH window: d1000000-d10fffff
> Apr 8 15:27:06 node1 kernel: PCI: Bridge: 0000:00:07.0
> Apr 8 15:27:06 node1 kernel: IO window: disabled.
> Apr 8 15:27:06 node1 kernel: MEM window: disabled.
> Apr 8 15:27:06 node1 kernel: PREFETCH window: disabled.
> Apr 8 15:27:06 node1 kernel: PCI: Bridge: 0000:02:00.0
> Apr 8 15:27:06 node1 kernel: IO window: disabled.
> Apr 8 15:27:06 node1 kernel: MEM window: f8000000-fbffffff
> Apr 8 15:27:06 node1 kernel: PREFETCH window: disabled.
> Apr 8 15:27:06 node1 kernel: PCI: Bridge: 0000:00:1c.0
> Apr 8 15:27:06 node1 kernel: IO window: disabled.
> Apr 8 15:27:06 node1 kernel: MEM window: f8000000-fbffffff
> Apr 8 15:27:06 node1 kernel: PREFETCH window: disabled.
> Apr 8 15:27:06 node1 kernel: PCI: Bridge: 0000:00:1e.0
> Apr 8 15:27:06 node1 kernel: IO window: b000-bfff
> Apr 8 15:27:06 node1 kernel: MEM window: fc100000-fc2fffff
> Apr 8 15:27:06 node1 kernel: PREFETCH window: d8000000-dfffffff
> Apr 8 15:27:07 node1 kernel: GSI 16 sharing vector 0xA9 and IRQ 16
> Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:00:02.0[A] ->
> GSI 16 (level, low) -> IRQ 169
> Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:04:00.0[A] ->
> GSI 16 (level, low) -> IRQ 169
> Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:05:00.0[A] ->
> GSI 16 (level, low) -> IRQ 169
> Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:05:01.0[A] ->
> GSI 16 (level, low) -> IRQ 169
> Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:00:03.0[A] ->
> GSI 16 (level, low) -> IRQ 169
> Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:00:04.0[A] ->
> GSI 16 (level, low) -> IRQ 169
> Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:00:06.0[A] ->
> GSI 16 (level, low) -> IRQ 169
> Apr 8 15:27:07 node1 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] ->
> GSI 16 (level, low) -> IRQ 169
> Apr 8 15:27:07 node1 kernel: NET: Registered protocol family 2
> Apr 8 15:27:07 node1 kernel: IP route cache hash table entries:
> 131072 (order: 8, 1048576 bytes)
> Apr 8 15:27:07 node1 kernel: TCP established hash table entries:
> 262144 (order: 10, 4194304 bytes)
> Apr 8 15:27:07 node1 kernel: TCP bind hash table entries: 65536
> (order: 8, 1048576 bytes)
> Apr 8 15:27:07 node1 kernel: TCP: Hash tables configured (established
> 262144 bind 65536)
> Apr 8 15:27:07 node1 kernel: TCP reno registered
> Apr 8 15:27:07 node1 kernel: audit: initializing netlink socket
> (disabled)
> Apr 8 15:27:07 node1 kernel: audit(1239218779.491:1): initialized
> Apr 8 15:27:07 node1 kernel: Total HugeTLB memory allocated, 0
> Apr 8 15:27:07 node1 kernel: VFS: Disk quotas dquot_6.5.1
> Apr 8 15:27:07 node1 kernel: Dquot-cache hash table entries: 512
> (order 0, 4096 bytes)
> Apr 8 15:27:08 node1 kernel: Initializing Cryptographic API
> Apr 8 15:27:08 node1 kernel: ksign: Installing public key data
> Apr 8 15:27:08 node1 kernel: Loading keyring
> Apr 8 15:27:08 node1 kernel: - Added public key 660501D58C5397BD
> Apr 8 15:27:08 node1 kernel: - User ID: Red Hat, Inc. (Kernel Module
> GPG key)
> Apr 8 15:27:08 node1 kernel: io scheduler noop registered
> Apr 8 15:27:08 node1 kernel: io scheduler anticipatory registered
> Apr 8 15:27:08 node1 kernel: io scheduler deadline registered
> Apr 8 15:27:08 node1 kernel: io scheduler cfq registered (default)
> Apr 8 15:27:08 node1 kernel: assign_interrupt_mode Found MSI
> capability
> Apr 8 15:27:08 node1 last message repeated 5 times
> Apr 8 15:27:08 node1 automount[3552]: lookup_read_master: lookup
> (nisplus): couldn't locate nis+ table auto.master
> Apr 8 15:27:08 node1 kernel: assign_interrupt_mode Found MSI
> capability
> Apr 8 15:27:09 node1 last message repeated 2 times
> Apr 8 15:27:09 node1 kernel: pci_hotplug: PCI Hot Plug PCI Core
> version: 0.5
> Apr 8 15:27:09 node1 kernel: ACPI: CPU0 (power states: C1[C1] C3[C3])
> Apr 8 15:27:09 node1 kernel: ACPI: CPU1 (power states: C1[C1] C3[C3])
> Apr 8 15:27:09 node1 kernel: ACPI: CPU2 (power states: C1[C1] C3[C3])
> Apr 8 15:27:09 node1 kernel: ACPI: CPU3 (power states: C1[C1] C3[C3])
> Apr 8 15:27:09 node1 kernel: ACPI Exception (acpi_processor-0681):
> AE_NOT_FOUND, Processor Device is not present [20060707]
> Apr 8 15:27:09 node1 kernel: ACPI: Getting cpuindex for acpiid 0x5
> Apr 8 15:27:09 node1 kernel: ACPI Exception (acpi_processor-0681):
> AE_NOT_FOUND, Processor Device is not present [20060707]
> Apr 8 15:27:09 node1 kernel: ACPI: Getting cpuindex for acpiid 0x6
> Apr 8 15:27:09 node1 kernel: ACPI Exception (acpi_processor-0681):
> AE_NOT_FOUND, Processor Device is not present [20060707]
> Apr 8 15:27:09 node1 kernel: ACPI: Getting cpuindex for acpiid 0x7
> Apr 8 15:27:09 node1 kernel: ACPI Exception (acpi_processor-0681):
> AE_NOT_FOUND, Processor Device is not present [20060707]
> Apr 8 15:27:09 node1 kernel: ACPI: Getting cpuindex for acpiid 0x8
> Apr 8 15:27:09 node1 kernel: Real Time Clock Driver v1.12ac
> Apr 8 15:27:09 node1 kernel: Non-volatile memory driver v1.2
> Apr 8 15:27:09 node1 kernel: Linux agpgart interface v0.101 (c) Dave
> Jones
> Apr 8 15:27:09 node1 kernel: Serial: 8250/16550 driver $Revision:
> 1.90 $ 4 ports, IRQ sharing enabled
> Apr 8 15:27:09 node1 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4)
> is a 16550A
> Apr 8 15:27:09 node1 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3)
> is a 16550A
> Apr 8 15:27:09 node1 kernel: 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a
> 16550A
> Apr 8 15:27:09 node1 kernel: 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a
> 16550A
> Apr 8 15:27:09 node1 kernel: RAMDISK driver initialized: 16 RAM disks
> of 16384K size 4096 blocksize
> Apr 8 15:27:09 node1 kernel: Uniform Multi-Platform E-IDE driver
> Revision: 7.00alpha2
> Apr 8 15:27:09 node1 kernel: ide: Assuming 33MHz system bus speed for
> PIO modes; override with idebus=xx
> Apr 8 15:27:09 node1 kernel: ESB2: IDE controller at PCI slot
> 0000:00:1f.1
> Apr 8 15:27:10 node1 kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] ->
> GSI 16 (level, low) -> IRQ 169
> Apr 8 15:27:10 node1 kernel: ESB2: chipset revision 9
> Apr 8 15:27:10 node1 kernel: ESB2: not 100% native mode: will probe
> irqs later
> Apr 8 15:27:10 node1 kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS
> settings: hda:DMA, hdb:pio
> Apr 8 15:27:10 node1 kernel: hda: TEAC DVD-ROM DV28EV, ATAPI CD/DVD-
> ROM drive
> Apr 8 15:27:10 node1 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Apr 8 15:27:10 node1 kernel: ide-floppy driver 0.99.newide
> Apr 8 15:27:10 node1 kernel: usbcore: registered new driver hiddev
> Apr 8 15:27:10 node1 kernel: usbcore: registered new driver usbhid
> Apr 8 15:27:10 node1 kernel: drivers/usb/input/hid-core.c: v2.6:USB
> HID core driver
> Apr 8 15:27:10 node1 kernel: PNP: No PS/2 controller found. Probing
> ports directly.
> Apr 8 15:27:10 node1 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
> Apr 8 15:27:10 node1 kernel: serio: i8042 AUX port at 0x60,0x64 irq
> 12
> Apr 8 15:27:10 node1 kernel: mice: PS/2 mouse device common for all
> mice
> Apr 8 15:27:10 node1 kernel: md: md driver 0.90.3 MAX_MD_DEVS=256,
> MD_SB_DISKS=27
> Apr 8 15:27:10 node1 kernel: md: bitmap version 4.39
> Apr 8 15:27:10 node1 kernel: TCP bic registered
> Apr 8 15:27:10 node1 kernel: Initializing IPsec netlink socket
> Apr 8 15:27:10 node1 kernel: NET: Registered protocol family 1
> Apr 8 15:27:10 node1 kernel: NET: Registered protocol family 17
> Apr 8 15:27:10 node1 kernel: ACPI: (supports S0 S4 S5)
> Apr 8 15:27:10 node1 kernel: Freeing unused kernel memory: 196k freed
> Apr 8 15:27:10 node1 kernel: Write protecting the kernel read-only
> data: 475k
> Apr 8 15:27:10 node1 kernel: SCSI subsystem initialized
> Apr 8 15:27:10 node1 kernel: QLogic Fibre Channel HBA Driver:
> 8.02.14.01
> Apr 8 15:27:10 node1 kernel: ACPI: PCI Interrupt 0000:0c:00.0[A] ->
> GSI 16 (level, low) -> IRQ 169
> Apr 8 15:27:10 node1 kernel: qla2xxx 0000:0c:00.0: Found an ISP2432,
> irq 169, iobase 0xffffc20000002000
> Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: Configuring PCI
> space...
> Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: Configure NVRAM
> parameters...
> Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: Verifying loaded
> RISC code...
> Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: Allocated (64 KB)
> for EFT...
> Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: Allocated (1413
> KB) for firmware dump...
> Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: Waiting for LIP to
> complete...
> Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: LIP reset occured
> (f700).
> Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: LIP occured
> (f700).
> Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: LIP reset occured
> (f7f7).
> Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: LOOP UP detected
> (4 Gbps).
> Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: Topology -
> (F_Port), Host Loop address 0x0
> Apr 8 15:27:11 node1 kernel: scsi0 : qla2xxx
> Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0:
> Apr 8 15:27:11 node1 kernel: QLogic Fibre Channel HBA Driver:
> 8.02.14.01
> Apr 8 15:27:11 node1 kernel: QLogic QLE2462 - PCI-Express to 4Gb
> FC, Dual Channel
> Apr 8 15:27:11 node1 kernel: ISP2432: PCIe (2.5GT/s x4) @ 0000:0c:
> 00.0 hdma+, host#=0, fw=4.04.00 [IP] [84XX]
> Apr 8 15:27:11 node1 kernel: Vendor: DGC Model: RAID
> 5 Rev: 0326
> Apr 8 15:27:11 node1 kernel: Type: Direct-
> Access ANSI SCSI revision: 04
> Apr 8 15:27:11 node1 kernel: qla2xxx 0000:0c:00.0: scsi(0:0:0:0):
> Enabled tagged queuing, queue depth 32.
> Apr 8 15:27:11 node1 kernel: SCSI device sda: 560557312 512-byte hdwr
> sectors (287005 MB)
> Apr 8 15:27:11 node1 kernel: sda: test WP failed, assume Write
> Enabled
> Apr 8 15:27:11 node1 kernel: sda: asking for cache data failed
> Apr 8 15:27:11 node1 kernel: sda: assuming drive cache: write through
> Apr 8 15:27:11 node1 kernel: SCSI device sda: 560557312 512-byte hdwr
> sectors (287005 MB)
> Apr 8 15:27:11 node1 kernel: sda: test WP failed, assume Write
> Enabled
> Apr 8 15:27:11 node1 kernel: sda: asking for cache data failed
> Apr 8 15:27:11 node1 kernel: sda: assuming drive cache: write through
> Apr 8 15:27:11 node1 kernel: sda:<6>sd 0:0:0:0: Device not ready:
> <6>: Current: sense key: Not Ready
> Apr 8 15:27:12 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:12 node1 kernel:
> Apr 8 15:27:12 node1 kernel: end_request: I/O error, dev sda, sector
> 0
> Apr 8 15:27:12 node1 kernel: Buffer I/O error on device sda, logical
> block 0
> Apr 8 15:27:12 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:12 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:12 node1 kernel:
> Apr 8 15:27:12 node1 kernel: end_request: I/O error, dev sda, sector
> 0
> Apr 8 15:27:12 node1 kernel: Buffer I/O error on device sda, logical
> block 0
> Apr 8 15:27:12 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:12 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:12 node1 kernel:
> Apr 8 15:27:12 node1 kernel: end_request: I/O error, dev sda, sector
> 0
> Apr 8 15:27:12 node1 kernel: Buffer I/O error on device sda, logical
> block 0
> Apr 8 15:27:12 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:12 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:12 node1 kernel:
> Apr 8 15:27:12 node1 kernel: end_request: I/O error, dev sda, sector
> 0
> Apr 8 15:27:12 node1 kernel: Buffer I/O error on device sda, logical
> block 0
> Apr 8 15:27:12 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:12 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:12 node1 kernel:
> Apr 8 15:27:12 node1 kernel: end_request: I/O error, dev sda, sector
> 0
> Apr 8 15:27:12 node1 kernel: Buffer I/O error on device sda, logical
> block 0
> Apr 8 15:27:12 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:12 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:12 node1 kernel:
> Apr 8 15:27:12 node1 kernel: end_request: I/O error, dev sda, sector
> 0
> Apr 8 15:27:13 node1 kernel: Buffer I/O error on device sda, logical
> block 0
> Apr 8 15:27:13 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:13 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:13 node1 kernel:
> Apr 8 15:27:13 node1 kernel: end_request: I/O error, dev sda, sector
> 0
> Apr 8 15:27:13 node1 kernel: Buffer I/O error on device sda, logical
> block 0
> Apr 8 15:27:13 node1 kernel: Dev sda: unable to read RDB block 0
> Apr 8 15:27:13 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:13 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:13 node1 kernel:
> Apr 8 15:27:13 node1 kernel: end_request: I/O error, dev sda, sector
> 0
> Apr 8 15:27:13 node1 kernel: Buffer I/O error on device sda, logical
> block 0
> Apr 8 15:27:13 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:13 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:13 node1 kernel:
> Apr 8 15:27:13 node1 kernel: end_request: I/O error, dev sda, sector
> 0
> Apr 8 15:27:13 node1 kernel: Buffer I/O error on device sda, logical
> block 0
> Apr 8 15:27:13 node1 kernel: unable to read partition table
> Apr 8 15:27:13 node1 kernel: sd 0:0:0:0: Attached scsi disk sda
> Apr 8 15:27:13 node1 kernel: Vendor: DGC Model: RAID
> 5 Rev: 0326
> Apr 8 15:27:13 node1 kernel: Type: Direct-
> Access ANSI SCSI revision: 04
> Apr 8 15:27:13 node1 kernel: qla2xxx 0000:0c:00.0: scsi(0:0:1:0):
> Enabled tagged queuing, queue depth 32.
> Apr 8 15:27:13 node1 kernel: SCSI device sdb: 560557312 512-byte hdwr
> sectors (287005 MB)
> Apr 8 15:27:13 node1 kernel: sdb: Write Protect is off
> Apr 8 15:27:13 node1 kernel: SCSI device sdb: drive cache: write
> through
> Apr 8 15:27:13 node1 kernel: SCSI device sdb: 560557312 512-byte hdwr
> sectors (287005 MB)
> Apr 8 15:27:13 node1 kernel: sdb: Write Protect is off
> Apr 8 15:27:14 node1 kernel: SCSI device sdb: drive cache: write
> through
> Apr 8 15:27:14 node1 kernel: sdb: sdb1
> Apr 8 15:27:14 node1 kernel: sd 0:0:1:0: Attached scsi disk sdb
> Apr 8 15:27:14 node1 kernel: GSI 17 sharing vector 0x42 and IRQ 17
> Apr 8 15:27:14 node1 kernel: ACPI: PCI Interrupt 0000:0c:00.1[B] ->
> GSI 17 (level, low) -> IRQ 66
> Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Found an ISP2432,
> irq 66, iobase 0xffffc20000004000
> Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Configuring PCI
> space...
> Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Configure NVRAM
> parameters...
> Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Verifying loaded
> RISC code...
> Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Allocated (64 KB)
> for EFT...
> Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Allocated (1413
> KB) for firmware dump...
> Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Waiting for LIP to
> complete...
> Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: LIP reset occured
> (f700).
> Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: LIP occured
> (f700).
> Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: LIP reset occured
> (f7f7).
> Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: LOOP UP detected
> (4 Gbps).
> Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: Topology -
> (F_Port), Host Loop address 0x0
> Apr 8 15:27:14 node1 kernel: scsi1 : qla2xxx
> Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1:
> Apr 8 15:27:14 node1 kernel: QLogic Fibre Channel HBA Driver:
> 8.02.14.01
> Apr 8 15:27:14 node1 kernel: QLogic QLE2462 - PCI-Express to 4Gb
> FC, Dual Channel
> Apr 8 15:27:14 node1 kernel: ISP2432: PCIe (2.5GT/s x4) @ 0000:0c:
> 00.1 hdma+, host#=1, fw=4.04.00 [IP] [84XX]
> Apr 8 15:27:14 node1 kernel: Vendor: DGC Model: RAID
> 5 Rev: 0326
> Apr 8 15:27:14 node1 kernel: Type: Direct-
> Access ANSI SCSI revision: 04
> Apr 8 15:27:14 node1 kernel: qla2xxx 0000:0c:00.1: scsi(1:0:0:0):
> Enabled tagged queuing, queue depth 32.
> Apr 8 15:27:14 node1 kernel: SCSI device sdc: 560557312 512-byte hdwr
> sectors (287005 MB)
> Apr 8 15:27:14 node1 kernel: sdc: test WP failed, assume Write
> Enabled
> Apr 8 15:27:15 node1 kernel: sdc: asking for cache data failed
> Apr 8 15:27:15 node1 kernel: sdc: assuming drive cache: write through
> Apr 8 15:27:15 node1 kernel: SCSI device sdc: 560557312 512-byte hdwr
> sectors (287005 MB)
> Apr 8 15:27:15 node1 kernel: sdc: test WP failed, assume Write
> Enabled
> Apr 8 15:27:15 node1 kernel: sdc: asking for cache data failed
> Apr 8 15:27:15 node1 kernel: sdc: assuming drive cache: write through
> Apr 8 15:27:15 node1 kernel: sdc:<6>sd 1:0:0:0: Device not ready:
> <6>: Current: sense key: Not Ready
> Apr 8 15:27:15 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:15 node1 kernel:
> Apr 8 15:27:15 node1 kernel: end_request: I/O error, dev sdc, sector
> 0
> Apr 8 15:27:15 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:15 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:15 node1 kernel:
> Apr 8 15:27:15 node1 kernel: end_request: I/O error, dev sdc, sector
> 0
> Apr 8 15:27:15 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:15 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:15 node1 kernel:
> Apr 8 15:27:15 node1 kernel: end_request: I/O error, dev sdc, sector
> 0
> Apr 8 15:27:15 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:15 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:15 node1 kernel:
> Apr 8 15:27:15 node1 kernel: end_request: I/O error, dev sdc, sector
> 0
> Apr 8 15:27:15 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:15 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:15 node1 kernel:
> Apr 8 15:27:15 node1 kernel: end_request: I/O error, dev sdc, sector
> 0
> Apr 8 15:27:15 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:15 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:16 node1 kernel:
> Apr 8 15:27:16 node1 kernel: end_request: I/O error, dev sdc, sector
> 0
> Apr 8 15:27:16 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:16 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:16 node1 kernel:
> Apr 8 15:27:16 node1 kernel: end_request: I/O error, dev sdc, sector
> 0
> Apr 8 15:27:16 node1 kernel: Dev sdc: unable to read RDB block 0
> Apr 8 15:27:16 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:16 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:16 node1 kernel:
> Apr 8 15:27:16 node1 kernel: end_request: I/O error, dev sdc, sector
> 0
> Apr 8 15:27:16 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:16 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:16 node1 kernel:
> Apr 8 15:27:16 node1 kernel: end_request: I/O error, dev sdc, sector
> 0
> Apr 8 15:27:16 node1 kernel: unable to read partition table
> Apr 8 15:27:16 node1 kernel: sd 1:0:0:0: Attached scsi disk sdc
> Apr 8 15:27:16 node1 kernel: Vendor: DGC Model: RAID
> 5 Rev: 0326
> Apr 8 15:27:16 node1 kernel: Type: Direct-
> Access ANSI SCSI revision: 04
> Apr 8 15:27:16 node1 kernel: qla2xxx 0000:0c:00.1: scsi(1:0:1:0):
> Enabled tagged queuing, queue depth 32.
> Apr 8 15:27:16 node1 kernel: SCSI device sdd: 560557312 512-byte hdwr
> sectors (287005 MB)
> Apr 8 15:27:16 node1 kernel: sdd: Write Protect is off
> Apr 8 15:27:16 node1 kernel: SCSI device sdd: drive cache: write
> through
> Apr 8 15:27:16 node1 kernel: SCSI device sdd: 560557312 512-byte hdwr
> sectors (287005 MB)
> Apr 8 15:27:16 node1 kernel: sdd: Write Protect is off
> Apr 8 15:27:17 node1 kernel: SCSI device sdd: drive cache: write
> through
> Apr 8 15:27:17 node1 kernel: sdd: sdd1
> Apr 8 15:27:17 node1 kernel: sd 1:0:1:0: Attached scsi disk sdd
> Apr 8 15:27:17 node1 kernel: GSI 18 sharing vector 0x4A and IRQ 18
> Apr 8 15:27:17 node1 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] ->
> GSI 21 (level, low) -> IRQ 74
> Apr 8 15:27:17 node1 kernel: ehci_hcd 0000:00:1d.7: EHCI Host
> Controller
> Apr 8 15:27:17 node1 kernel: ehci_hcd 0000:00:1d.7: new USB bus
> registered, assigned bus number 1
> Apr 8 15:27:17 node1 kernel: ehci_hcd 0000:00:1d.7: debug port 1
> Apr 8 15:27:17 node1 kernel: ehci_hcd 0000:00:1d.7: irq 74, io mem
> 0xfc900000
> Apr 8 15:27:17 node1 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started,
> EHCI 1.00, driver 10 Dec 2004
> Apr 8 15:27:17 node1 kernel: usb usb1: configuration #1 chosen from 1
> choice
> Apr 8 15:27:17 node1 kernel: hub 1-0:1.0: USB hub found
> Apr 8 15:27:17 node1 kernel: hub 1-0:1.0: 8 ports detected
> Apr 8 15:27:17 node1 kernel: USB Universal Host Controller Interface
> driver v3.0
> Apr 8 15:27:17 node1 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] ->
> GSI 21 (level, low) -> IRQ 74
> Apr 8 15:27:17 node1 kernel: uhci_hcd 0000:00:1d.0: UHCI Host
> Controller
> Apr 8 15:27:17 node1 kernel: uhci_hcd 0000:00:1d.0: new USB bus
> registered, assigned bus number 2
> Apr 8 15:27:17 node1 kernel: uhci_hcd 0000:00:1d.0: irq 74, io base
> 0x0000ace0
> Apr 8 15:27:17 node1 kernel: usb usb2: configuration #1 chosen from 1
> choice
> Apr 8 15:27:17 node1 kernel: hub 2-0:1.0: USB hub found
> Apr 8 15:27:17 node1 kernel: hub 2-0:1.0: 2 ports detected
> Apr 8 15:27:17 node1 kernel: GSI 19 sharing vector 0x52 and IRQ 19
> Apr 8 15:27:17 node1 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] ->
> GSI 20 (level, low) -> IRQ 82
> Apr 8 15:27:17 node1 kernel: uhci_hcd 0000:00:1d.1: UHCI Host
> Controller
> Apr 8 15:27:17 node1 kernel: uhci_hcd 0000:00:1d.1: new USB bus
> registered, assigned bus number 3
> Apr 8 15:27:17 node1 kernel: uhci_hcd 0000:00:1d.1: irq 82, io base
> 0x0000acc0
> Apr 8 15:27:18 node1 kernel: usb usb3: configuration #1 chosen from 1
> choice
> Apr 8 15:27:18 node1 kernel: hub 3-0:1.0: USB hub found
> Apr 8 15:27:18 node1 kernel: hub 3-0:1.0: 2 ports detected
> Apr 8 15:27:18 node1 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] ->
> GSI 21 (level, low) -> IRQ 74
> Apr 8 15:27:18 node1 kernel: uhci_hcd 0000:00:1d.2: UHCI Host
> Controller
> Apr 8 15:27:18 node1 kernel: uhci_hcd 0000:00:1d.2: new USB bus
> registered, assigned bus number 4
> Apr 8 15:27:18 node1 kernel: uhci_hcd 0000:00:1d.2: irq 74, io base
> 0x0000aca0
> Apr 8 15:27:18 node1 kernel: usb usb4: configuration #1 chosen from 1
> choice
> Apr 8 15:27:18 node1 kernel: hub 4-0:1.0: USB hub found
> Apr 8 15:27:18 node1 kernel: hub 4-0:1.0: 2 ports detected
> Apr 8 15:27:18 node1 kernel: usb 1-1: new high speed USB device using
> ehci_hcd and address 2
> Apr 8 15:27:18 node1 kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] ->
> GSI 20 (level, low) -> IRQ 82
> Apr 8 15:27:18 node1 kernel: uhci_hcd 0000:00:1d.3: UHCI Host
> Controller
> Apr 8 15:27:18 node1 kernel: uhci_hcd 0000:00:1d.3: new USB bus
> registered, assigned bus number 5
> Apr 8 15:27:18 node1 kernel: uhci_hcd 0000:00:1d.3: irq 82, io base
> 0x0000ac80
> Apr 8 15:27:18 node1 kernel: usb usb5: configuration #1 chosen from 1
> choice
> Apr 8 15:27:18 node1 kernel: hub 5-0:1.0: USB hub found
> Apr 8 15:27:18 node1 kernel: hub 5-0:1.0: 2 ports detected
> Apr 8 15:27:18 node1 kernel: usb 1-1: configuration #1 chosen from 1
> choice
> Apr 8 15:27:18 node1 kernel: hub 1-1:1.0: USB hub found
> Apr 8 15:27:18 node1 kernel: hub 1-1:1.0: 2 ports detected
> Apr 8 15:27:18 node1 kernel: megasas: 00.00.03.15-RH1 Wed Nov. 21
> 10:29:45 PST 2007
> Apr 8 15:27:18 node1 kernel: megasas: 0x1000:0x0060:0x1028:0x1f0c:
> bus 1:slot 0:func 0
> Apr 8 15:27:18 node1 kernel: ACPI: PCI Interrupt 0000:01:00.0[A] ->
> GSI 16 (level, low) -> IRQ 169
> Apr 8 15:27:18 node1 kernel: megasas: FW now in Ready state
> Apr 8 15:27:18 node1 kernel: scsi2 : LSI SAS based MegaRAID driver
> Apr 8 15:27:18 node1 kernel: Vendor: FUJITSU Model:
> MBC2073RC Rev: D506
> Apr 8 15:27:19 node1 kernel: Type: Direct-
> Access ANSI SCSI revision: 05
> Apr 8 15:27:19 node1 kernel: Vendor: FUJITSU Model:
> MBC2073RC Rev: D506
> Apr 8 15:27:19 node1 kernel: Type: Direct-
> Access ANSI SCSI revision: 05
> Apr 8 15:27:19 node1 kernel: Vendor: DP Model:
> BACKPLANE Rev: 1.05
> Apr 8 15:27:19 node1 kernel: Type:
> Enclosure ANSI SCSI revision: 05
> Apr 8 15:27:19 node1 kernel: Vendor: DELL Model: PERC 6/
> i Rev: 1.11
> Apr 8 15:27:19 node1 kernel: Type: Direct-
> Access ANSI SCSI revision: 05
> Apr 8 15:27:19 node1 kernel: SCSI device sde: 142082048 512-byte hdwr
> sectors (72746 MB)
> Apr 8 15:27:19 node1 kernel: sde: Write Protect is off
> Apr 8 15:27:19 node1 kernel: SCSI device sde: drive cache: write back
> Apr 8 15:27:19 node1 kernel: SCSI device sde: 142082048 512-byte hdwr
> sectors (72746 MB)
> Apr 8 15:27:19 node1 kernel: sde: Write Protect is off
> Apr 8 15:27:19 node1 kernel: SCSI device sde: drive cache: write back
> Apr 8 15:27:19 node1 kernel: sde: sde1 sde2 sde3 sde4 < sde5 sde6
> sde7 sde8 >
> Apr 8 15:27:19 node1 kernel: sd 2:2:0:0: Attached scsi disk sde
> Apr 8 15:27:19 node1 kernel: Initializing USB Mass Storage driver...
> Apr 8 15:27:19 node1 kernel: usb 1-5: new high speed USB device using
> ehci_hcd and address 3
> Apr 8 15:27:19 node1 kernel: usb 1-5: configuration #1 chosen from 1
> choice
> Apr 8 15:27:19 node1 kernel: hub 1-5:1.0: USB hub found
> Apr 8 15:27:19 node1 kernel: hub 1-5:1.0: 4 ports detected
> Apr 8 15:27:19 node1 kernel: usb 1-1.1: new full speed USB device
> using ehci_hcd and address 4
> Apr 8 15:27:19 node1 kernel: usb 1-1.1: configuration #1 chosen from
> 1 choice
> Apr 8 15:27:19 node1 kernel: input: Dell DRAC5 as /class/input/input0
> Apr 8 15:27:19 node1 kernel: input: USB HID v1.10 Keyboard [Dell
> DRAC5] on usb-0000:00:1d.7-1.1
> Apr 8 15:27:19 node1 kernel: input: Dell DRAC5 as /class/input/input1
> Apr 8 15:27:19 node1 kernel: input: USB HID v1.10 Mouse [Dell DRAC5]
> on usb-0000:00:1d.7-1.1
> Apr 8 15:27:20 node1 kernel: usb 1-1.2: new high speed USB device
> using ehci_hcd and address 5
> Apr 8 15:27:20 node1 kernel: usb 1-1.2: configuration #1 chosen from
> 1 choice
> Apr 8 15:27:20 node1 kernel: scsi3 : SCSI emulation for USB Mass
> Storage devices
> Apr 8 15:27:20 node1 kernel: scsi4 : SCSI emulation for USB Mass
> Storage devices
> Apr 8 15:27:20 node1 kernel: usbcore: registered new driver usb-
> storage
> Apr 8 15:27:20 node1 kernel: USB Mass Storage support registered.
> Apr 8 15:27:20 node1 kernel: Vendor: Dell Model: Virtual
> CDROM Rev: 123
> Apr 8 15:27:20 node1 kernel: Type: CD-
> ROM ANSI SCSI revision: 00
> Apr 8 15:27:20 node1 kernel: Vendor: Dell Model: Virtual
> Floppy Rev: 123
> Apr 8 15:27:20 node1 kernel: Type: Direct-
> Access ANSI SCSI revision: 00
> Apr 8 15:27:20 node1 kernel: sd 4:0:0:0: Attached scsi removable disk
> sdf
> Apr 8 15:27:20 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:20 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:20 node1 kernel:
> Apr 8 15:27:20 node1 kernel: end_request: I/O error, dev sdc, sector
> 560557184
> Apr 8 15:27:20 node1 kernel: printk: 9 messages suppressed.
> Apr 8 15:27:20 node1 kernel: Buffer I/O error on device sdc, logical
> block 70069648
> Apr 8 15:27:20 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:20 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:20 node1 kernel:
> Apr 8 15:27:20 node1 kernel: end_request: I/O error, dev sdc, sector
> 560557184
> Apr 8 15:27:20 node1 kernel: Buffer I/O error on device sdc, logical
> block 70069648
> Apr 8 15:27:20 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:20 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:20 node1 kernel:
> Apr 8 15:27:21 node1 kernel: end_request: I/O error, dev sdc, sector
> 0
> Apr 8 15:27:21 node1 kernel: Buffer I/O error on device sdc, logical
> block 0
> Apr 8 15:27:21 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:21 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:21 node1 kernel:
> Apr 8 15:27:21 node1 kernel: end_request: I/O error, dev sdc, sector
> 8
> Apr 8 15:27:21 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:21 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:21 node1 kernel:
> Apr 8 15:27:21 node1 kernel: end_request: I/O error, dev sdc, sector
> 0
> Apr 8 15:27:21 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:21 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:21 node1 kernel:
> Apr 8 15:27:21 node1 kernel: end_request: I/O error, dev sda, sector
> 560557184
> Apr 8 15:27:21 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:21 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:21 node1 kernel:
> Apr 8 15:27:21 node1 kernel: end_request: I/O error, dev sda, sector
> 560557184
> Apr 8 15:27:21 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:21 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:21 node1 kernel:
> Apr 8 15:27:21 node1 kernel: end_request: I/O error, dev sda, sector
> 0
> Apr 8 15:27:21 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:21 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:21 node1 kernel:
> Apr 8 15:27:21 node1 kernel: end_request: I/O error, dev sda, sector
> 8
> Apr 8 15:27:21 node1 kernel: sd 0:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:21 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:22 node1 kernel:
> Apr 8 15:27:22 node1 kernel: end_request: I/O error, dev sda, sector
> 0
> Apr 8 15:27:22 node1 kernel: kjournald starting. Commit interval 5
> seconds
> Apr 8 15:27:22 node1 kernel: EXT3-fs: mounted filesystem with ordered
> data mode.
> Apr 8 15:27:22 node1 kernel: SELinux: Disabled at runtime.
> Apr 8 15:27:22 node1 kernel: e1000e: Intel(R) PRO/1000 Network Driver
> - 0.2.0
> Apr 8 15:27:22 node1 kernel: e1000e: Copyright (c) 1999-2007 Intel
> Corporation.
> Apr 8 15:27:22 node1 kernel: ACPI: PCI Interrupt 0000:0a:00.0[A] ->
> GSI 16 (level, low) -> IRQ 169
> Apr 8 15:27:22 node1 kernel: sd 0:0:0:0: Attached scsi generic sg0
> type 0
> Apr 8 15:27:22 node1 kernel: sd 0:0:1:0: Attached scsi generic sg1
> type 0
> Apr 8 15:27:22 node1 kernel: sd 1:0:0:0: Attached scsi generic sg2
> type 0
> Apr 8 15:27:22 node1 kernel: sd 1:0:1:0: Attached scsi generic sg3
> type 0
> Apr 8 15:27:22 node1 kernel: scsi 2:0:32:0: Attached scsi generic sg4
> type 13
> Apr 8 15:27:22 node1 kernel: sd 2:2:0:0: Attached scsi generic sg5
> type 0
> Apr 8 15:27:22 node1 kernel: scsi 3:0:0:0: Attached scsi generic sg6
> type 5
> Apr 8 15:27:22 node1 kernel: sd 4:0:0:0: Attached scsi generic sg7
> type 0
> Apr 8 15:27:22 node1 kernel: input: PC Speaker as /class/input/input2
> Apr 8 15:27:22 node1 kernel: EDAC MC: Ver: 2.0.1 May 23 2008
> Apr 8 15:27:22 node1 kernel: 0000:00:04.0: eth0: (PCI Express:2.5GB/
> s:Width x4) 00:15:17:7d:cc:32
> Apr 8 15:27:22 node1 kernel: 0000:00:04.0: eth0: Intel(R) PRO/1000
> Network Connection
> Apr 8 15:27:22 node1 kernel: 0000:00:04.0: eth0: MAC: 0, PHY: 4, PBA
> No: c57721-005
> Apr 8 15:27:22 node1 kernel: ACPI: PCI Interrupt 0000:0a:00.1[B] ->
> GSI 17 (level, low) -> IRQ 66
> Apr 8 15:27:22 node1 kernel: intel_rng: FWH not detected
> Apr 8 15:27:22 node1 kernel: hda: ATAPI 24X DVD-ROM drive, 198kB
> Cache, UDMA(33)
> Apr 8 15:27:22 node1 kernel: Uniform CD-ROM driver Revision: 3.20
> Apr 8 15:27:22 node1 kernel: 0000:00:04.0: eth1: (PCI Express:2.5GB/
> s:Width x4) 00:15:17:7d:cc:33
> Apr 8 15:27:23 node1 kernel: 0000:00:04.0: eth1: Intel(R) PRO/1000
> Network Connection
> Apr 8 15:27:23 node1 kernel: 0000:00:04.0: eth1: MAC: 0, PHY: 4, PBA
> No: c57721-005
> Apr 8 15:27:23 node1 kernel: shpchp: Standard Hot Plug PCI Controller
> Driver version: 0.4
> Apr 8 15:27:23 node1 kernel: EDAC MC0: Giving out device to
> i5000_edac.c I5000: DEV 0000:00:10.0
> Apr 8 15:27:23 node1 kernel: Broadcom NetXtreme II Gigabit Ethernet
> Driver bnx2 v1.6.9 (December 8, 2007)
> Apr 8 15:27:23 node1 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] ->
> GSI 16 (level, low) -> IRQ 169
> Apr 8 15:27:23 node1 kernel: eth2: Broadcom NetXtreme II BCM5708
> 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 169,
> node addr 001ec9b285f5
> Apr 8 15:27:23 node1 kernel: ACPI: PCI Interrupt 0000:07:00.0[A] ->
> GSI 16 (level, low) -> IRQ 169
> Apr 8 15:27:23 node1 kernel: eth3: Broadcom NetXtreme II BCM5708
> 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 169,
> node addr 001ec9b285f7
> Apr 8 15:27:23 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:23 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:23 node1 kernel:
> Apr 8 15:27:23 node1 kernel: end_request: I/O error, dev sdc, sector
> 560557184
> Apr 8 15:27:23 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:23 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:23 node1 kernel:
> Apr 8 15:27:23 node1 kernel: end_request: I/O error, dev sdc, sector
> 560557184
> Apr 8 15:27:23 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:23 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:23 node1 kernel:
> Apr 8 15:27:23 node1 kernel: end_request: I/O error, dev sdc, sector
> 560557304
> Apr 8 15:27:23 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:23 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:23 node1 kernel:
> Apr 8 15:27:23 node1 kernel: end_request: I/O error, dev sdc, sector
> 560557304
> Apr 8 15:27:23 node1 kernel: sd 1:0:0:0: Device not ready: <6>:
> Current: sense key: Not Ready
> Apr 8 15:27:23 node1 kernel: Add. Sense: Logical unit not ready,
> manual inte...(message truncated) |
|
| Back to top |
|
| |
External
Since: May 31, 2004
Posts: 104
|
(Msg. 3) Posted: Mon Apr 13, 2009 5:17 pm
Post subject: Re: 10g clusterware causes reboots [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
The Derfer wrote:
> I have Linux (OEL5.2) running 10g clusterware on 2 nodes.
> OCFS2 is running as well, with a SAN-based OCFS2 filesystem
> mounted on both hosts (written to by only one until the other fails
> over).
>
<snip>
>Apr 8 15:27:29 node1 kernel: Add. Sense: Logical unit not ready,
> manual intervention required
> Apr 8 15:27:29 node1 kernel:
Are your OCR/Voting devices visible to BOTH nodes CONCURRENTLY? If not,
you have a REAL problem... >> Stay informed about: 10g clusterware causes reboots |
|
| Back to top |
|
| |
External
Since: Apr 14, 2009
Posts: 1
|
(Msg. 4) Posted: Tue Apr 14, 2009 5:12 am
Post subject: Re: 10g clusterware causes reboots [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Apr 13, 4:01 pm, The Derfer wrote:
> I have Linux (OEL5.2) running 10g clusterware on 2 nodes.
> OCFS2 is running as well, with a SAN-based OCFS2 filesystem
> mounted on both hosts (written to by only one until the other fails
> over).
>
> When I reboot one host, the ethernet interface eth0:2 appears on the
> other, assuming the VIP of the downed host.
> But then when that host comes back up, the 2nd host reboots
> itself outright. Has anyone seen this behavior in either
> clusterware or OCFS2 before? Oracle engineers claim it's
> OCFS2 doing this but I'm not sure. Why would wither host
> reboot at all without me doing the rebooting?
Yeah I saw it a while back when testing in a similar config. Lots of
varied opinions on OCFS2 and stability/useability ... etc. There are
some timeout config thingie's one can play around with ( check out
Jeffrey Hunter's site www.idevelopment.info ).
One of the formerly frequent posters on cdos when he stayed on topic
recommended only deploying RAC in situations like this in a 4 node
configuration. I don't think that is an official recommendation from
Oracle but I could be wrong. >> Stay informed about: 10g clusterware causes reboots |
|
| Back to top |
|
| |
| Related Topics: | Required SAP CO & SAP CRM For DIRECT CLIENT; Email resumes.. - DIRECT CLIENT Requirement SAP CO & SAP CRM ; Email resumes to deepika@e-triune.com or Call 4082690061-113 1)REQUIRED-SAP CO (Controlling) functional-DIRECT CLIENT-Immediate Interview. 2)REQUIRED-SAP CRM with Service Contracts-DIRECT CLIENT-Immedia...
AQ and JMS Question - Hi, I am integrating with an application which uses a PL/SQL call specification as a method of extending the application. Ultimately I wont to put the parameter on a Queue (backed by Oracle AQ) and have it consumed by Message Driven Beans (which use JMS...
Possible use of a Cursor - I have a complex query that I hope I can explain it well enough for everyone to understand. I have a table that contains information for work instructions. Contained in the table are "MACHINE_PROC" these are groupings of machining processes....
sql query problem related to rownum. please help - i need to do a top-n query after doing a sorting using order by. the query i am using is as below select * from (select * from table order by colA,colB) where rownum < 100 i am having almost 1 lakh records in the table and because of the two levels...
FK versus PK - Database beginner here, What does it mean when a column is both a primary key and a foreign key? |
|
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Search
Profile
Private Messages
Log in
